行锐研发中国*单泵浦双温型模温机
- 点击次数：1390 发布时间：2012-8-3
我司跟意大利MERI公司联合研发，*单泵浦双温型水循环模温机。
精密成型的*选择,以单马达提供两种不同循环水温控制公母模具为不同温度，而得到*成型品质要求．
●高科技的结晶 ●ASSOCIATED HIGH TECHNOLOGY.
●设计* ●ADVANCED DESIGNING．
●让您掌握模具温度. ●PRECISELY POSSESSED MOLD TEMPERATURE CONTROLLER.
产品特点Features：
●采用单马达双温泵，可提供两组不同的温度控制,节省电能与空间
●This type can provide two different temp. for ulation controller.
●采用意大利制『MERI』马达，提供高压力，减少温差，节省电能。
●Adopting "CIRO" motor from Italy, ensuring high pressure, providing temperature error reducing and saving power.
●日本『OMRON』温控器，触摸式数字显示微电脑双组P.I.D，控制在±１℃内.
●Originally Japanese made "OMRON" temperature controller, P.I.D control and digital touch pad. Also it”s high precision±1℃
●采用日本[FUJI]、[OMRON]、意大利[ODE]、[OR].
●Electric parts use[FUJI]、[OMRON]、[ODE]、[OR]
●分离式控制箱设计，*断绝水气、油气、热量侵入，延长电气零件寿命.
●Separay controlled box patently designed. Insulates the invading of moisture and thermal energy, thus extending the time span of electricity parts.
●连锁防错电路及实用故障指示，完整保护模温机稳定工作,维修保养无需专业人员,.
●Chained anti-mistaken circuit and realistically malfunctioned instruction, entire protection of mold temperature controller en-sure the steady working conditions.
●采用304不锈钢一体成型无缝管，减少管阻及锈垢.
●316 stainless steel integrated pipelines for less pipe resistance and rust.
規格表 SPECIFICATIONS
| | 機型 Model | DT-120 |
| | 使用電源 POWER SUPPLY | AC3∮380V 50HZ OR OTHER |
| | 溫控範圍 Temperature range | 室溫+5℃~120℃ |
| | 溫控精度 Temp.control accuracy | P.I.D±1℃ |
| | 傳熱媒體 Heat transfer medium | 水 CLEAN WATER |
| | 冷卻方式 Cooling method | 直接冷卻 DIRECT |
| | 泵浦馬力 Motor capacity | 2HP |
| 模具一 | 加熱能力 Heating capacity #1 | 6KW/9KW |
| zui大流量 MAX FLOW RATE #1 | 50L/MIN | |
| zui大壓力 MAX PRESSURE #1 | 4KG/CM2 | |
| 模具二 | 加熱能力 Heating capacity #2 | 6KW/9KW |
| zui大流量 MAX FLOW RATE #2 | 50L/MIN | |
| zui大壓力 MAX PRESSURE #2 | 4KG/CM2 | |
| | zui大電力消耗 TOTAL POWER | 13.5KW/19.5KW |
| | 警報功能 Alertfunction | 缺相/反轉/缺水/超溫/超載/超壓 |
| | 冷卻水配管 Cooling water pipe | 1/2" |
| | 循環水配管 Circulation water pipe | 3/8"×4進4出*2組 |
| | 外型尺寸 LxH（CM） | 75×35×78 |
| | 重量 Weight | 70KG |
●以上規格如有變更,恕不另行通知,以實機為准. ●特殊規格及多機一體機型可另設計製造.Special design request.