| 炼胶机 Application:The mill is used for rubber. 用 途：本机可供橡胶的塑炼、混炼、热炼和压片用 结构简述：本机主要用辊筒、机架、轴承、调距装置、加热冷却系统、事故停车装置、润滑系统和电气控制系统等部分组成。主电机经减速机、驱动齿轮及速比齿轮驱动辊筒相对运转。 特 点：1、辊筒用合金冷硬铸铁制成，工作表面具有较高的硬度，耐磨耐用。辊筒内腔可通入蒸汽或冷却水以便调节辊筒的工作温度，以满足炼胶工艺的要求。 2、辊距的调节为手动，调距准确灵敏。 With Way:The this aircraft mainly for the rubber plasticization, the mixed iron-smelting, hotly builds up the use. General Design:The mill consists mainly of rolls,frame,bearings.roll nip adjusting screws,heating and cooling device,emergency stop,lubrication system and such sections as electrical controls and,etc. The main electric motor arrives the front and rear rolls to rotate opposiy through reducer.driving gears and friction gears Features:1、The rolls are made of chilled alloyed cast iron.Their working surfaces are of high hardness and wear-resistant.The working temperature of the bored rolls is controllable steam or cooling water that pass through them thus,to meet the requirements of milling process. 2、Roll nip adjustment is realized by hand operation which can obtain high accuracy and sensitivity. 主要技术参数 Technical Specifications | 项目 规格 | XK-160 | XK-250 | XK-360 | XK-400 | XK-450 | XK-560 | | 辊筒直接 Roller Diameter mm | 160mm | 250mm | 360mm | 400mm | 450mm | 560mm | | 辊筒工作长度 Roller Length mm | 320mm | 620mm | 900mm | 1000mm | 1200mm | 1530mm | | 辊筒速比 Roller Ratio | 1:1.35 | 1:1.10 | 1:1.25 | 1:1.27 | 1:1.27 | 1:1.27 | | 电机功率 Main Power kw | 7.5kw | 18.5kw | 30kw | 40kw | 55kw | 90kw | | 重量 Weight kg | 1t | 2.5t | 6t | 7.8t | 12.5t | 17.5t | | 外型尺寸（L×W×H） Overall Dimension cm | 1.16×1.92×1.37m | 3.22×1.5×1.29m | 1.92×1.65×1.725m | 4.3×1.7×1.8m | 5.05×1.9×1.88m | 5.37×1.95×2.19 | | 
