全自动聚氨酯PU鞋底鞋垫自动发泡生产线

节省65%电力：使用水循环方式加热的方法

省人力：使用自动开合模，亦可选择机械手进行自动浇注

PU鞋垫鞋底浇注机：

这条生产线可以同时制作多种不同颜色的产品。

.X,Y轴设计，满足浇注头上下，左右运动的需要。

.自动灌注、计量准确、注料位置精准。

.混合速度高、原料同步性好，混合均匀。

.*的混合系统设计、混合头更换简单、快速。

PU鞋垫鞋底全自动生产线：

.坚固的机械构造，运行平稳、使用寿命长、节省人工。

.自动开合模具、高强度合模压力、闭合紧密、有效节省原材料。

.自动摇模，满足各种型体的多种摇模方式。

.自动加温，铝合金模板快速导热、节约能源。

.根据国内模具的实际情况，开发出*的模具装夹机构，模具更换简单、快速。

注：我们可以根据客户的实际需求设计以及生产全自动机械。

成品图片：

我们的服务：

我们的优点：

Fully automatic polyurethane PU outsole and insoles automatic foaming equipment/foaming machine 

PRODUCT APPLICATION

This polyurethane Foaming machine with mould carrier line can produce various twin-color and single-color polyurethane insoles, outsoles. The mold injection is automatic controlled.

Why choose it:

1. Imported components are used for the metering pump and electrical components, greatly enhancing equipment running reliability and service life.

2. The moulds can be opened and closed automatically by the pneumatic system which can save the labor cost.

3. The molds are heated by circulating water heating system, it can save 3/2 electricity as the traditional way, and the temperature of the molds are stabler.

TECHNICAL DETAILS

Item Name: LZ-XC905 triple-components foaming machine

All power of the machine 12KW,4*380V/60HZ

The type of applicable foam:Sole,insole, walking shoe, etc.

Flux of inject:30g-100g/S (Attention:the flux could be configured)

The press of infect:0.1MPA-3.99MPA

The mix proportion:100-65;100-110

Viscosity(22°) POLY( polyethylene )500-2000MPAS ISO( Multi-isocyanate )500-2000MPAS

Time of injecting:0.01-9.99/S( precision 0.01S)

Precision of injection:0.1/100

Process of injecting: automatic inject by PLC programmed

Pneumatic pressure:0.6-0.8MPa

Dimension:Wide:2.1M; High:2.35M; Long:3.5M

Weight of the machine:1.5ton

Pouring nozzle:With collision impact needle, Never wear, Never plug

PLC Programmed computer(English demonstration)

It could control 100 patterns’ capacity of injecting at the same time and could wash the Gas-injecting automatically

heat system:It can automatic control temperature

Turntable production line

Total power:22kw

Pneumatic mold station: 100, 120, 160 for choose.

Material for work station:3mm, iron plate

Water heating box:150L,304 stainless steel,18KW

Water-circulating pige:With joints

Line height(without mould):750mm

Driving Motor:3kw

Transducer:1 set

Diameter for production line:About 8 meter