Kepital F10-01 POM KEP油管
Kepital F10-01 POM KEP
Kepital F10-01 POM KEP
Kepital F20-03 M POM KEP
Kepital F20-51U POM KEP
Kepital F20-52 LOF POM KEP
Kepital F20-52SM POM KEP
Kepital F10-01 POM KEP材料物性表如下:
| Physical | Nominal Value | Unit | Test Method |
| Density | 1.41 | g/cm3 | ISO 1183 |
| Melt Mass-Flow Rate （MFR） | 3.0 | g/10 min | ISO 1133 |
| Molding Shrinkage - Flow | |||
| 0.118 in | 0.022 | in/in | No Standard |
| 0.118 in | 2.2 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
| Tensile Stress （Yield, 73°F） | 9140 | psi | ISO 527-2 |
| Nominal Tensile Strain at Break （73°F） | 40 | % | ISO 527-2 |
| Flexural Modulus （73°F） | 341000 | psi | ISO 178 |
| Flexural Strength （73°F） | 11900 | psi | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
| Charpy Notched Impact Strength | 3.3 | ft·lb/in2 | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
| Heat Deflection Temperature （264 psi, Unannealed） | 205 | °F | ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
| Surface Resistivity | 1.0E+16 | ohm | IEC 60093 |
| Volume Resistivity | 1.0E+14 | ohm·cm | IEC 60093 |
| Dielectric Strength | 480 | V/mil | IEC 60243-1 |
Duracon TW-51 POM Polyplastics
Hostaform C 52021 POM Ticona
Hostaform C 27021 AST POM Ticona
Hostaform C 9021 GV3/30 POM Ticona
