TRS-20K LBS扭力传感器 TRS-20K LBS扭力传感器
概述
TRS SERIES CAPACITY RANGES: 500, 1,000, 2,000, 5,000, 10,000, 20,000, 50,000, 100,000 INCH LBS.
The TRS Series reaction torque sensors offer long term reliability due to non moving parts and state of the art bonded foil strain gages. The anodized aluminum TRS Series is also available as a two axis sensor, torque and thrust, on special request. Whenever possible, the best approach for precision torque measurements is via reaction torque sensing, eliminating high maintenance and high cost of slip rings, bearings, and brushes.
参数
订货型号
TRS-500 500 3.00 2.00 .50 1.25 .125 .28 2.25 4 .7
TRS-1K 1,000 3.00 2.00 .50 1.25 .125 .28 2.25 4 .7
TRS-2K 2,000 3.00 2.00 .50 1.25 .125 .28 2.25 4 .7
TRS-5K 5,000 4.00 2.50 .50 1.50 .125 .28 3.25 8 1.2
TRS-10K 10,000 4.50 2.50 .75 1.50 .125 .28 3.75 8 2.2
TRS-20K 20,000 4.50 3.00 .75 2.00 .125 .34 3.75 8 2.2
TRS-50K 50,000 6.75 3.50 1.00 3.00 .125 .41 5.75 8 7.2
TRS-100K 100,000 6.75 3.50 1.00 3.00 .125 .41 5.75 8 7.2
TRS-500 190K 500 750 1,500
TRS-1K 190K 500 750 1,500
TRS-2K 380K 1,000 1,500 2,000
TRS-5K 930K 2,000 2,000 3,000
TRS-10K 2,700K 5,000 4,000 6,000
TRS-20K 5,800K 10,000 6,500 10,000
TRS-50K 8,000K 24,000 12,000 18,000
TRS-100K 20,000K 50,000 20,000 30,000
配件
TH Thrust Bridge (Consult our applications engineers For torque thrust load combinations.)
GOD Strain Gages installed on Outside Diameter for thru hole applications
THD SERIES CAPACITY RANGES: 2,000, 3,000, 5,000, 7,500, 10,000, 15,000, 20,000, 30,000, 50,000 LBS.
Our THD Series thru-hole load cells offer an outside diameter of 3.00 inches and up to nine different thru-hole diameter options per capacity range. These load cells are manufactured from heat treated 17-4 ph stainless steel. The sensing element incorporates bonded foil strain gages of the highest quality and are sealed for protection against most industrial environments.
参数
Rated Output (R.O.): 2 mV/V nominal
Nonlinearity: 0.25% of R.O.
Nonlinearity Hole Diameters Y, Z: 0.5% of R.O.
Hysteresis: 0.25% of R.O.
Nonrepeatability: 0.1% of R.O.
Zero Balance: 1.0% of R.O.
Compensated Temp. Range: 60° to 160°F
Safe Temp. Range: -65° to 200°F
Temp. Effect on Output: 0.005% of Load/°F
Temp. Effect on Zero: 0.01% of R.O./°F
Terminal Resistance: 350 ohms nominal
Excitation Voltage: 10 VDC
Safe Overload: 150% of R.O.
订货型号
MODEL CAPACITY
THD-2K 2,000 LBS.
THD-3K 3,000 LBS.
THD-5K 5,000 LBS.
THD-7.5K 7,500 LBS.
THD-10K 10,000 LBS.
THD-15K 15,000 LBS.
THD-20K 20,000 LBS.
THD-30K 30,000 LBS.
THD-50K 50,000 LBS.
INSIDE HOLE DIAMETERS
-P -Q -R -S -T -V -W -Y -Z
NOMINAL HOLE DIA. 1/8” 3/16” 1/4” 3/8” 1/2” 5/8” 3/4” 1” 1-1/4”
ACTUAL HOLE DIA. .128 .193 .266 .391 .532 .656 .781 1.032 1.281
