SWP-1K LBS称重传感器 SWP-1K LBS称重传感器
SWS SERIES CAPACITY RANGES: 10, 20, 50, 100, 250, 600, 1,000 FT. LBS.
Our SWS Series reaction type socket wrench torque sensors are available in ranges from 10 ft-lbs. through 1000 ft-lbs. and provide accurate measurements of bolt or nut wrenching torques. These sensors are bi-directional so both tightening and break-away torques can be measured. These low cost sensors deliver high accuracy and outstanding frequency response. Calibration of mechanical torque wrenches may be performed with this sensor. The sensing element incorporates bonded foil strain gages of the highest quality.
参数
Rated Output (R.O.): 2 mV/V nominal
Nonlinearity: 0.2% of R.O.
Hysteresis: 0.2% of R.O.
Nonrepeatability: 0.1% of R.O.
Zero Balance: 1.0% of R.O.
Compensated Temp. Range: 60° to 160°F
Safe Temp. Range: -65° to 200°F
Temp. Effect on Output: 0.005% of Load/°F
Temp. Effect on Zero: 0.01% of R.O./°F
Terminal Resistance: 350 ohms nominal
Excitation Voltage: 10 VDC
Safe Overload: 150% of R.O.
订货型号
SWS-10 10 1/4 2.063 1.312 .375 .625
SWS-20 20 1/4 2.063 1.312 .375 .625
SWS-50 50 3/8 2.312 1.312 .500 .875
SWS-100 100 3/8 2.350 1.312 .500 .875
SWS-250 250 1/2 2.625 1.500 .688 1.125
SWS-600 600 3/4 3.938 2.000 1.063 1.625
SWS-1K 1,000 1.0 4.375 1.875 1.125 2.500
SSM称重传感器
SSM SERIES CAPACITY RANGES: 50, 100, 200, 500, 1,000, 2,000, 2,500, 5,000, 8,000, 10,000 LBS.
The SSM Series Surface Stud Mount load cells were designed to be surface mounted with the load applied through the mounting stud for tension or compression applications. The matching surface must be flat and at least 2 inches in diameter. Eight threaded mounting holes are provided on the bottom surface for fastening down from beneath. These sensors are manufactured from heat treated 17-4ph stainless steel, and the sensing element incorporates bonded foil strain gages of the highest quality. They are sealed for protection against most industrial environments.
参数
Rated Output (R.O.): 2 mV/V nominal
Nonlinearity: 0.15% of R.O.
Hysteresis: 0.15% of R.O.
Nonrepeatability: 0.05% of R.O.
Zero Balance: 1.0% of R.O.
Compensated Temp. Range: 60° to 160°F
Safe Temp. Range: -65° to 200°F
Temp. Effect on Output: 0.005% of Load/°F
Temp. Effect on Zero: 0.005% of R.O./°F
Terminal Resistance: 350 ohms nominal
Excitation Voltage: 10 VDC
Safe Overload: 150% of R.O.
Deflection Inches: 0.002 @ R.O.
订货型号
Order Code Model Capacity Range Calibration Description
SSM-50 50 lb Compression Included, Tension Optional
SSM-100 100 lb Compression Included, Tension Optional
SSM-200 200 lb Compression Included, Tension Optional
SSM-500 500 lb Compression Included, Tension Optional
SSM-1K 1,000 lb Compression Included, Tension Optional
SSM-2K 2,000 lb Compression Included, Tension Optional
SSM-2.5K 2,500 lb Compression Included, Tension Optional
SSM-5K 5,000 lb Compression Included, Tension Optional
SSM-8K 8,000 lb Compression Included, Tension Optional
SSM-10K 10,000 lb Compression Included, Tension Optional
配件
CAL-TEDS N/A Plug & Play Option with Connector
TC-CAL N/A Tension Calibration Option
