设备特性：
1、节省65%电力：使用水循环方式加热的方法
2、省人力：模具采用自动开合模，仅需3-4个人即可完成生产线操作，与传统生产线相比，可以节省一半的人工成本，同时减少操作中造成的废品；
3、计量泵及电器元件采用进口器件，根本性提高设备运行可靠性及其使用寿命；
4、新一代程控器，功能全面、实用、操作也更方便，采用针阀式注头，*磨损，使制品品质更有保障；
5、模具采用循环水加温方式，能耗节省传统方式的3/2以上，模具温度控制在±2℃之内。
产品用途：
生产各种双色，单色聚氨酯鞋底成型及一次性成型连帮成型，可制作各种高,中档皮鞋,休闲鞋,劳保鞋,旅游鞋等PU鞋材类制品。
我们的服务：
我们的优点：
China factory in producing pu boots snow boots cotton boots leather boots women shoes foaming plants
Product Application
Our Polyurethane foam machine with mould carrier line can produce polyurethane insoles, outsoles, various high and medium class leather shoes, casual shoes, safety shoes, travel shoes,slippers, sandals and other types of polyurethane shoes.
Product Component
This equipment includes one three components low pressure pu foam machine and one automatic banana-type production line. According to the client's production capacity, the production line has 24, 36, 48, 60 or other mold stations for choose.
Why choose it:
1. Imported components are used for the metering pump and electrical components, greatly enhancing equipment running reliability and service life.
2.The moulds can be opened and closed automatically by the pneumatic system which can save the labor cost.
3.The molds are heated by circulating water heating system,it can save 3/2 electricity compared with the traditional way, it also makes the temperature of the molds more stable.
TECHNICAL DETAILS
Item Name: LZ-XC905 triple-components foaming machine
All power of the machine 12KW,4*380V/60HZ
The type of applicable foam:Sole,insole, walking shoe, etc.
Flux of inject:30g-100g/S (Attention:the flux could be configured)
The press of infect:0.1MPA-3.99MPA
The mix proportion:100-65;100-110
Viscosity(22°) POLY( polyethylene )500-2000MPAS ISO( Multi-isocyanate )500-2000MPAS
Time of injecting:0.01-9.99/S( precision 0.01S)
Precision of injection:0.1/100
Process of injecting:Manual inject by PLC programmed
Pneumatic pressure:0.6-0.8MPa
Dimension:Wide:2.1M; High:2.35M; Long:3.5M
Weight of the machine:1.5ton
Pouring nozzle:With collision impact needle, Never wear, Never plug
PLC Programmed computer(English demonstration)
It could control 100 patterns’ capacity of injecting at the same time and could wash the Gas-injecting automatically
heat system:It can automatic control temperature
Annular Workbench+ Mould Heating System
Pneumatic mold station: 24, 36, 48 or 60 for choose
Material for work station:3mm, iron plate
Water heating box: 150L
Water recycling tube: 18kw
