PEI PI-10GF/000

东莞龙辉祥塑胶原料公司自2002年6月成立以来,建立了完整的市场供应系统。以市场为导向，积极参与市场竞争，不断完善规范化管理，使企业经营规模不断发展壮大共同进步,共同发展，本公司*经营各国塑胶原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品级ABS、AS、PS、PP工程塑料：:COC镜头料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

PolyOne Edgetek PI-10GF/000 Polyetherimide （PEI）, Glass Filled材料介绍：

Glass Fiber Reinforced

POLYETHERIMIDE（PEI）

Advantages 
1. Continuous use temperature of 365degrees F （180 degrees C） 
2. High strength 
3. Inherently flame retardant

PERFORMANCE PROPERTIES

LONG-TERM HEAT RESISTANCE

Excellent stability of physicaland mechanical properties at elevated temperatures thanks to high glasstransition temperature of 217 °C. Available with relative thermal indices （RTI）up to 180 °C PERFORMANCEPROPERTIESLONG-TERMHEAT RESISTANCE

Excellent stabilityof physical and mechanical properties at elevated temperatures thanks to highglass transition temperature of 217 °C. Available with relative thermal indices（RTI） up to 180 °C

STRENGTHAND STIFFNESS

Outstanding strengthand amorphous thermoplastic among the available alternatives, with predictablestiffness and strength up to 200 °C. Unfilled, transparent grades are equal instrength to other thermoplastics with opacifying fillers.

DIMENSIONAL STABILITY

Among the most dimensionallystable thermoplastics available, offering predictability over a widetemperature range. Filled grades offer exceptionally high-tolerance dimensionalcapabilities.

ENVIRONMENTAL STRESS & CRACKING RESISTANCE

Unlike most other amorphousthermoplastics, Ultem resins retain strength and resist stress cracking whenexposed to automotive and aircraft fluids, aliphatic hydrocarbons, alcohols,acids, and weak aqueous solutions

FLAMMABILITY, SMOKE GENERATION AND TOXICITY

Inherent flame resistancewithout additives in most grades - exceptionally difficult to ignite, with alimiting oxygen index （LOI） of 47%, meeting UL94 V0 specifications in sectionsas thin as 0.41 mm. Generates extremely low smoke per the NBS smoke evolutiontest, with products of combustion no more toxic than those of wood.

PROCESSABILITY

Can be extruded, thermoformed,extrusion blow molded and injection molded, and flowability permits long flowlengths down to 0.2mm thick using conventional injection molding equipment.

郑重承诺！我公司是专业原料供应商，原料均国外进口，原厂包装，有专业人士质量检测，原料均可提供一系列报告证明等。

因为专注，所以专业，*服务，互利共赢。是我公司一贯的经营宗指！

： 

：@139.com 

：罗

:罗长龙　
:　
传真号码:
地址:中国广东东莞市樟木头镇塑胶原料市场

PEI PI-10GF/000其它产品

销售Hi CB 237 G 1420 PP
PEI PI-000/15T
销售Hi CB 237 G 1312 PP
销售Hi CB 237 G 1222 PP
PEI PI-05CF/000 EM
销售Hi CB 237 G PP
PEI Stat-Tech PI-05CF/000R
销售Hi CB 225 G PP
PEI LubriOne CTX-502