Laticonther 80 GR/45 PPS
These grades also meet European Directive 2002/72/EC for food contact applications and BfR （German Federal Institute for Risk Assessment , formerly BgVV, the German Federal Institute for Consumer Health Protection and Veterinary Medicine） standards.Certain grades of PPS comply with ISO 10993 and USP Class VI, and Drug （DMF 14844） and Device （MAF-1097） Master Files have been created for them.
Aerospace Wing and Leading Edge Nose
Fiber-reinforced composites based on ’s high performance polyphenylene sulfide （PPS） make an important contribution to weight reduction of the Airbus A340 and A380. This helps lower fuel consumption and increase range and passenger capacity.
Composites based on PPS are now being used for numerous applications in airplane construction, including the wing nose, the ailerons and the aircraft keel beam. In comparison with aluminum, use of the PPS composites increases design freedom, reduces weight by 20% to 50% and eliminates the possibility of corrosion.PPS already had all the basic characteristics for use in aircraft construction – resistance to high temperatures and aggressive chemicals, hardness, impact strength, dimensional stability and inherent flame-retardancy.
The trick was to create suitable structural elements embodying these attributes. This is done by extruding the PPS into film, combining it with chosen fibrous reinforcements and forming the final part under high pressure at 300°C （572°F）. Individual parts are then fabricated from the pressed composites and welded together in an autoclave to form the final component as one piece.
供水歧管
切断杆和连接器组成的玻璃纤维增强，由于其高强度和刚度。防滑性能的球阀门机制，确保*顺利运作。zui后，保留夹具，受到*的机械载荷，40％玻璃纤维增强聚苯硫醚1140L4注塑成型。特点：Hostaform和水组件进行了优化优异的耐久性，在某些情况下，防滑性能，即使在高负荷。在英国，生活用水通常是从家庭规模的估计。然而，安装设备允许国内水公司是由英国大西洋塑料水表的简单连接。在与赫斯特工程聚合物事业部，英国，广泛的有限元分析和模流研究合作制作了一个坚固的外壳。这些组件所提出的要求是相当可观的。例如，外壳必须能承受50年的12酒吧的压力，并有相应的高蠕变和疲劳强度。在自来水的其他成型也从泰科纳聚合物制成。
errule
has been working closely with systems and cable manufacturers to develop a number of special （PPS） grades tailored specifically to the requirements of fibre optic technology. The 8670A61 grade has outstanding flow properties, making it ideal for fine-structured design components such as plug connectors, known as ferrules.
Other essential properties for this application are very low water absorption, low creep at high temperatures, good dimensional stability and even shrinkage in both flow and transverse directions. Vectra liquid crystal polymer is also used in fibre optics – particularly for connectors. The crucial factors here are Vectra’s good mechanical properties, even in thin wall sections, and the extreme precision with which ferrules can be made. Ferrules can be injection moulded to incorporate holes to carry the 125 μm thick glass fibres to tolerances of 1-2 μm. These ferrules use Vectra grade A460, specially developed for such applications.
产品图片
东莞市龙辉祥塑胶原料公司是一家专业从事塑胶原料进口贸易公司。主营各国通用塑胶、工程塑胶、特种工程塑胶。公司以“诚信为本，创新求魂”的精神在客户中树立了良好的口碑。从进口到出口严格把关，可提供COA,SGS,UL黄卡!保证原厂原包!我是龙辉祥，期待你的来电!
电 话：
传 真：
手 机：
：罗（业务）
:罗长龙
:
传真号码:
地址:中国广东东莞市樟木头镇塑胶原料市场
销售Laticonther 80 GR/45 PPS其它产品
销售Laticonther 80 GCE/650 PPS
销售Laticonther 80 CPG/700 PPS
销售Zy RS LC1600 NC010
销售Zy RS LC1600
销售Zy RS LC1200
销售Zy RS LC1000
销售Zy RS LC3090
销售Zy RS LC3060
销售Zy RS LC3030
