CoolPoly E5107 PPS描述：
CoolPoly E series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows design freedom in applications previously restricted to metals. The E series is electrically conductive and provides inherent EMI/RFI shielding characteristics.
PPS
These grades also meet European Directive 2002/72/EC for food contact applications and BfR （German Federal Institute for Risk Assessment , formerly BgVV, the German Federal Institute for Consumer Health Protection and Veterinary Medicine） standards.PPS is a high-temperature linear PPS that offers excellent dimensional stability, inherent flame resistance, and excellent chemical and solvent resistance.PPS is insoluble in all known solvents below 200°C （392° F）. It also shows tremendous stability in both typical and alternative automotive fuels. Standard injection moldable grades with glass fibers and/or mineral reinforcements are available, but many specialty grades are available for improved lubricity, low warpage, faster cycling and other areas of enhanced performance.Certain grades of PPS comply with ISO 10993 and USP Class VI, and Drug （DMF 14844） and Device （MAF-1097） Master Files have been created for them.Aerospace Wing and Leading Edge Nose
This helps lower fuel consumption and increase range and passenger capacity.PPS already had all the basic characteristics for use in aircraft construction – resistance to high temperatures and aggressive chemicals, hardness, impact strength, dimensional stability and inherent flame-retardancy. The trick was to create suitable structural elements embodying these attributes. This is done by extruding the PPS into film, combining it with chosen fibrous reinforcements and forming the final part under high pressure at 300°C （572°F）. Individual parts are then fabricated from the pressed composites and welded together in an autoclave to form the final component as one piece.Fiber-reinforced composites based on ’s high performance polyphenylene sulfide （PPS） make an important contribution to weight reduction of the Airbus A340 and A380.
供水歧管
特点：优化优异的耐久性，在某些情况下，防滑性能，即使在高负荷。在英国，生活用水通常是从家庭规模的估计。然而，安装设备允许国内水公司是由英国大西洋塑料水表的简单连接。在与赫斯特工程聚合物事业部，英国，广泛的有限元分析和模流研究合作制作了一个坚固的外壳，这些组件所提出的要求是相当可观的。例如，外壳必须能承受50年的12酒吧的压力，并有相应的高蠕变和疲劳强度。在自来水的其他成型也从泰科纳聚合物制成。切断杆和连接器组成的玻璃纤维增强，由于其高强度和刚度。，确保*顺利运作。zui后，保留夹具，受到*的机械载荷，40％玻璃纤维增强聚苯硫醚注塑成型。产品图片
东莞市龙辉祥塑胶原料公司是一家专业从事塑胶原料进口贸易公司。主营各国通用塑胶、工程塑胶、特种工程塑胶。公司以“诚信为本，创新求魂”的精神在客户中树立了良好的口碑。从进口到出口严格把关，可提供COA,SGS,UL黄卡!保证原厂原包!我是龙辉祥，期待你的来电!
电 话：
传 真：
手 机：
：罗（业务）
:罗长龙
:
传真号码:
地址:中国广东东莞市樟木头镇塑胶原料市场
销售CoolPoly E5107 PPS其它产品
销售Zy 70G33L BK031
销售CoolPoly E5105 PPS
销售Zy 70G33HS1L BK031
销售Zy 70G33HS1L BK031
销售CoolPoly E5101 PPS
销售CoolPoly D5112 PPS
销售CoolPoly D5110 PPS
销售Zy 70G33GRA BK350
销售CoolPoly D5108 PPS
