China PPS hGR30 PPS描述：
China products have been specified in a wide range of injection molded applications such as automotive under-the-hood parts, power train components, pumps, fuel system components, surface mount electrical/electronics components, blower and pump parts, protective and non-stick coatings, surgical devices and power tools. PPS can be extruded or blow molded, may be used to produce films and composites, and is an excellent candidate for fuel cells and diesel fuel cars.
PPS
PPS is a high-temperature linear PPS that offers excellent dimensional stability, inherent flame resistance, and excellent chemical and solvent resistance. PPS is insoluble in all known solvents below 200°C （392° F）.It also shows tremendous stability in both typical and alternative automotive fuels.Standard injection moldable grades with glass fibers and/or mineral reinforcements are available, but many specialty grades are available for improved lubricity, low warpage, faster cycling and other areas of enhanced performance. Certain grades of PPS comply with ISO 10993 and USP Class VI, and Drug （DMF 14844） and Device （MAF-1097） Master Files have been created for them. These grades also meet European Directive 2002/72/EC for food contact applications and BfR （German Federal Institute for Risk Assessment , formerly BgVV, the German Federal Institute for Consumer Health Protection and Veterinary Medicine） standards.Aerospace Wing and Leading Edge Nose
This is done by extruding the PPS into film, combining it with chosen fibrous reinforcements and forming the final part under high pressure at 300°C （572°F）. Individual parts are then fabricated from the pressed composites and welded together in an autoclave to form the final component as one piece.Fiber-reinforced composites based on ’s high performance polyphenylene sulfide （PPS） make an important contribution to weight reduction of the Airbus A340 and A380. This helps lower fuel consumption and increase range and passenger capacity.PPS already had all the basic characteristics for use in aircraft construction – resistance to high temperatures and aggressive chemicals, hardness, impact strength, dimensional stability and inherent flame-retardancy. The trick was to create suitable structural elements embodying these attributes.
CD播放器
在这个技术解决方案的选择材料，日本专家一起在娱乐电子产品的选择液晶聚合物（LCP）和聚苯硫醚（PPS）两种材料。能够满足没有任何问题的必然要求。镜头的持有人，另一方面，zui重要的标准是刚性好，重量轻耦合，以排除任何干扰的高频率的共振。再次的Vectra LCP的是能够满足应用要求。索尼的CD托架插槽，选择玻璃纤维增强聚苯硫醚。PPS的高刚性和强度的关键。威达用于生产是沿着两个轴移动底板。在此应用中，机械性能，适合在CD / MD播放机的特殊工作条件的要求，即高弹性模量和高冲击强度。在各种固定的音响设备，CD / MD播放器，索尼使用移动磁铁，而不是通常的辊。索尼的A-MAX系统（*的移动磁铁2轴），是指这种类型的驱动器。产品图片
东莞市龙辉祥塑胶原料公司是一家专业从事塑胶原料进口贸易公司。主营各国通用塑胶、工程塑胶、特种工程塑胶。公司以“诚信为本，创新求魂”的精神在客户中树立了良好的口碑。从进口到出口严格把关，可提供COA,SGS,UL黄卡!保证原厂原包!我是龙辉祥，期待你的来电!
电 话：
传 真：
手 机：
：罗（业务）
:罗长龙
:
传真号码:
地址:中国广东东莞市樟木头镇塑胶原料市场
销售China PPS hGR30 PPS其它产品
销售Zy 101 NC010
销售China PPS hGR20 PPS
销售Zy FR73M25GWF GY372
销售Zy FR73G20GWF NC010
销售Zy FR73G20GWF GY372
销售China PPS hFR61 PPS
销售Zy 73G15THSL BK240
销售China PPS hFR52 PPS
销售Zy 7331T NC010A
