销售ADPOLY EV-700 EVA

东莞龙辉祥塑胶原料公司自2002年6月成立以来,建立了完整的市场供应系统。以市场为导向，积极参与市场竞争，不断完善规范化管理，使企业经营规模不断发展壮大共同进步,共同发展，本公司*经营各国塑胶原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品级ABS、AS、PS、PP工程塑料：:COC镜头料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

ADPOLY EV-700 EVA

EV-700 is EVA based adhesive resin containing anhydride.This grade shows strong adhesion to PE, EVA, aluminum, and it has polyolefin-likeproperties. In addition, its processability is excellent.EV-700 is mainly intended for use as a adhesive resin in auto head liner.

Used during flexible lidding conversion 

 They are solvent free and don’t require the environmental controls associated with solvent-based or lacquer heat seal coatings. Inventories and the number of SKU’s can be reduced, as a number of Appeel resins seal to multiple substrates, leading to less-costly inventory.And there are no blends to be made, ensuring that the resins perform the way they should time after time. Whether you are running an extrusion coating, cast or blown film line, sealing to PP, PE, PS, PVC, PET, epoxy, Barex or Aclar, there is a grade of Appeel lidding sealant resin that will run in your process, and prove to be cost-effective while meeting the demands of brand owners and consumers.lidding sealant resins not only offer predictable and repeatable peel strength, but also provide a pre-compounded one-bag solution that easily runs in a variety of conversion processes.

 

lidding sealant resins have been formulated for versatility with all of this in mind for easy peel applications, and are only from DuPont. This brochure describes our current commercial offering of Appeel grades for lidding applications

EVA加工

Safety & Handling A Product Safety Bulletin, Material Safety Data Sheet, and more detailed information on compounding and processing Elvax resins for specific applications are available from your DuPont Packaging and Industrial Polymers representative.

 

They can also be processed using conventional rubber processing techniques such as Banbury, two-roll milling and compression molding.can be used in conventional extrusion equipment designed to process polyethylene resins. However, corrosion-protected barrels, screws, adapters, and dies are recommended, since, at sustained melt temperatures above 446°F.EVA resins can be processed by conventional thermoplastic processing techniques, including injection molding, structural foam molding, sheet and shape extrusion, blow molding and wire coating. 食品级EVAEVA Resin complies with Food and Drug Administration Regulation 21 CFR 177.1350（a）（1） - - Ethylene-vinyl acetate copolymers, subject to the limitations and requirements therein. This Regulation describes polymers that may be used in contact with food, subject to the finished food-contact article meeting the extractive limitations under the intended conditions of use, as shown in paragraph （b）（1） of the Regulation.

产品图片

东莞市龙辉祥塑胶原料公司是一家专业从事塑胶原料进口贸易公司。主营各国通用塑胶、工程塑胶、特种工程塑胶。公司以“诚信为本，创新求魂”的精神在客户中树立了良好的口碑。从进口到出口严格把关，可提供COA,SGS,UL黄卡!保证原厂原包!我是龙辉祥，期待你的来电!

 

电  话：

传  真：

手  机：

：罗（业务）

 

 

:罗长龙　
:　
传真号码:
地址:中国广东东莞市樟木头镇塑胶原料市场

销售ADPOLY EV-700 EVA其它产品

销售美国SABIC CYCOLOY PC/ABS CM5820

销售美国SABIC CYCOLOY PC/ABS CH6310
销售美国SABIC CYCOLOY PC/ABS CM6210
销售美国SABIC CYCOLOY PC/ABS CM6140
销售ADPOLY EV-650 EVA
销售美国SABIC CYCOLOY PC/ABS CH6410
销售ADPOLY EV-600 EVA
销售美国SABIC CYCOLOY PC/ABS CE8510
销售美国SABIC CYCOLOY PC/ABS CE3210