PP Tipco Tipcolene TPE 1000
我公司现货销售 Tipco Industries Tipcolene pp全系列产品：
部分产品性能介绍如下：
| Application | Features in Brief | Grade | More |
| Auto Interiors and Appliance Fascia | Environmentally friendly material, Easy Recyclability, 45-50% special wood filler, Excellent Extrudability | Tipwood/50/N/EX | |
| Front & Rear Bumper | Elastomer modified, UV Stabilized Paintable Polypropylene Compound . | IBP/FH/NH/533 | |
| Bumper | Elastomer modified, UV Stabilized Paintable Polypropylene Compound . | Tipcolene/E/362S | |
| Bumper | Elastomer modified, UV Stabilized Polypropylene Compound . | TPE/1000 | |
| Instrument Panel | Specially designed PP Compound with super high impact st., UV resistance and high HDT. | FPDG/M/55Y/IN | |
| Dashboard | Mineral filled, Elastomer modified UV Stabilized, Scratch resistant PP Compound. | Tipcolene/HR/7224/HN | |
| Upper Instrument Panel | Specially designed PP Compound with Super high stiffness, UV Stabilised. | ISL58/NH/264L | |
| Lower Instrument Panel | Mineral filled, High impact UV Stabilised PP Compound. | ISRH/2NF/NH/264L | |
| Instrument Panel | Mineral filled, Super High impact UV Stabilized PP Compound. | FPDZ/1000/6GL/IN | |
| Instrument Panel | Mineral filled, Super High impact UV StabSilized PP Compound. | FPDC/TM/BK/IN | |
| Front Grill | Chemically coupled Glass filled PP | RPG20/N/IN/CC | |
| Helmet Box/Luggage Box | Specailly designed Glass filled PP Compound with superior properties （T.S, Izod Impact, HDT）. | SEB/200 | |
| Mineral filled, High Impact Polypropylene compound. | FPT20/N/IN/PPC/SM | ||
| Mineral filled, High Impact controlled rheology PP Compound. | FPT20/N/IN/PPC/SV | ||
| 10% Mineral filled PP Compound with high impact strength. | FPT10/N/IN/PPC/SRF | ||
| 30% Mineral filled PP Compound, controlled Rheology, High impact | FPT30/SPL/BK | ||
| Engine Parts | Mineral filled, High Heat resistant Polypropylene compound. | IBJH/SA/20/NH/11/L | |
| Grip Assembly | Mineral filled PP Compound | FPC10/4BS/IN | |
| Speedometer Box | 40% Talc filled, high heat resistant PP compound | FPT40/TW/IN/PRL | |
| Side grill/Air filter Assembly | 30% Talc filled High Impact PP compound. | FPT30/BK/CP/IN | |
| 10% Wallostonite filled PP Compound with high impact strength. | FPW10/N/IN/PPC/SRF | ||
| Trim Dash side R/L | Controlled Rheology, Super high Impact PP Compound | FPZ30/GR | |
| Rotor fan blade | Glass filled PP compound in Metallic colour. | Tipcolene/Alfa | |
| Grip Assembly | 25% Filled PP Compound with Super high impact strength. | Tipcolene HR/7222/BX | |
| Garnish Instrument Panel （R/L） | 30% Talc filled, Super high impact UV Stabilized PP Compound. | FPZ/GLU | |
| Lid Glove Box | 10% Talc filled, High Impact PP Compound. | FPZ/CL | |
| Case Glove box | Specially designed PP Compound with good stiffness and impact. | FPZ8/CU | |
| Cover staring | 5% Talc filled, high impact PP compound. | FPZ/C3 | |
| Bracket, Gr.Shift Bolt | 20% Talc filled, High Impact strength PP compound. | FPZ8/GR | |
| Box console lowers | Controlled Rheology, High heat resistant PP Compound. | FPZ8/Mod.BB/GR | |
| Cover triming Belt | 30% Talc filled PP Compound. | FPZ/TB/BK | |
| Hood meter duster | 30% Talc filled, Super high Impact strength PP Compound. | FPZ/HMC/BK | |
| Cover triming Belt | 5% Talc filled, Super high impact, controlled Rheology PP Compound. | FPZ/30/GR | |
| 40% Talc filled PP Compound in Black colour. | FPT/40/BK/IN | ||
| 30% Talc filled, high impact strength PP Compound. | FPT30/PPC |
PP塑料，化学名称：聚丙烯 英文名称:Polypropylene（简称PP） 比重:0.9-0.91克/立方厘米 成型收缩率:1.0-2.5% 成型温度：160-220℃ 。 【成分结构】 PP为结晶型高聚物，常用塑料中PPzui轻，密度仅为0.91g/cm3（比水小）。通用塑料中，PP的耐热性，其热变形温度为80-100℃，能在沸水中煮。PP有良好的耐应力开裂性，有很高的弯曲疲劳寿命，俗称“百折胶”。PP的综合性能优于PE料。PP产品质轻、韧性好、耐化学性好。 PP的缺点：尺寸精度低、刚性不足、耐候性差、易产生“铜害”，它具有后收缩现象，脱模后，易老化、变脆、易变形。 日常生活中，常用的保鲜盒就是由PP材料制成。
【成型特性】
1.结晶料,吸湿性小,易发生融体破裂,*与热金属接触易分解.
2.流动性好,但收缩范围及收缩值大,易发生缩孔.凹痕,变形.
3.冷却速度快,浇注系统及冷却系统应缓慢散热,并注意控制成型温度.料温低温高压时容易取向,模具温度低于50度时,塑件不光滑,易产生熔接不良,流痕,90度以上易发生翘曲变形
4.塑料壁厚须均匀,避免缺胶,尖角,以防应力集中. 【工艺特点】 PP在熔融温度下有较好的流动性，成型性能好，
PP在加工上有两个特点：
其一：PP熔体的粘度随剪切速度的提高而有明显的下降（受温度影响较小）；
其二：分子取向程度高而呈现较大的收缩率。 PP的加工温度在200-300℃左右较好，它有良好的热稳定性（分解温度为310℃），但高温下（270-300℃），长时间停留在炮筒中会有降解的可能。因PP的粘度随着剪切速度的提高有明显的降低，所以提高注射压力和注射速度会提高其流动性，改善收缩变形和凹陷。模温宜控制在30-50℃范围内。PP熔体能穿越很窄的模具缝隙而出现披锋。PP在熔化过程中，要吸收大量的熔解热（比热较大），产品出模后比较烫。PP料加工时不需干燥，PP的收缩率和结晶度比PE低。
本公司承诺:所销售之塑胶原料均为进口原厂原包材料、均可提供原厂的物性表，UL MSDS SGS COC 咨询！
安博塑胶（香港）有限公司
联 系 人：陈 （）
：
：86-
传真号码：86-
邮 箱：abplas abplas163.com
：1940006008
地址：中国广东省东莞市樟木头镇塑胶市场3期A栋
:陈
:86-
传真号码:86- :abplas
地址:中国广东省东莞市樟木头镇塑胶市场3期A栋
TPE 1000 Tipcolene Tipco其它产品
TPE 1000 Tipcolene Tipco
MD TPE Tipcolene Tipco
PP NPP 25-2002 Network
PP NPP 25-2001 Network
PP NPP 25-1902 Network
PP NPP 25-1602 TF40 Network
PP NPP 25-1503 GF30 Network
PP NPP 25-1503 GF25 Network
PP NPP 25-1503 GF10 Network
