销售RTP 1381 D TFE 13 SI 2 PPS

东莞龙辉祥塑胶原料公司自2002年6月成立以来,建立了完整的市场供应系统。以市场为导向，积极参与市场竞争，不断完善规范化管理，使企业经营规模不断发展壮大共同进步,共同发展，本公司*经营各国塑胶原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品级ABS、AS、PS、PP工程塑料：:COC镜头料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

RTP 1381 D TFE 13 SI 2 PPS

products have been specified in a wide range of injection molded applications such as automotive under-the-hood parts, power train components, pumps, fuel system components, surface mount electrical/electronics components, blower and pump parts, protective and non-stick coatings, surgical devices and power tools. PPS can be extruded or blow molded, may be used to produce films and composites, and is an excellent candidate for fuel cells and diesel fuel cars.

CD/MD-Player

In selecting the materials for this technical solution, the Japanese specialist in entertainment electronics together with Polyplastics （the affiliate in Asia） opted for two materials from : Vectra liquid crystal polymer （LCP） and polyphenylene sulphide （PPS）. In various CD/MD players for stationary hi-fi equipment, Sony uses moving magnets instead of the usual rollers. Sony refers to this type of drive as the A-MAX system （Advanced Moving Magnet 2 Axis）.

 

Once again, Vectra LCP was able to meet the application requirements. For the slot for the CD carriage, Sony chose glass-fibre-reinforced . The high rigidity and strength of this easyflowing PPS from were crucial here.Vectra is used to produce the baseplate which is movable along two axes. In this application, a mechanical property profile tailored to the special operating conditions in a CD/MD player was required, i.e. high elastic modulus and high impact strength. Vectra was able to meet the necessary requirements without any problem. For the lens holder, on the other hand, the important criterion was lightweight coupled with good rigidity to exclude any disturbing high-frequency resonances.

PPS供水歧管

在自来水的其他成型也从泰科纳聚合物制成。 切断杆和连接器组成的玻璃纤维增强Hostaform GV 1/30，由于其高强度和刚度。在英国，生活用水通常是从家庭规模的估计。然而，安装设备允许国内水公司是由英国大西洋塑料水表的简单连接。在与赫斯特工程聚合物事业部，英国，广泛的有限元分析和模流研究合作制作了一个坚固的外壳，从Hostaform2521。这些组件所提出的要求是相当可观的。例如，外壳必须能承受50年的12酒吧的压力，并有相应的高蠕变和疲劳强度。防滑性能的Hostaform9021 球阀门机制，确保*顺利运作。zui后，保留夹具，受到*的机械载荷，40％玻璃纤维增强聚苯硫醚1140L4注塑成型。特点：Hostaform和水组件进行了优化优异的耐久性，在某些情况下，防滑性能，即使在高负荷。

Domestic Water Supply Manifold

In collaboration with Hoechst Technical Polymers Division, UK, extensive FEM and mould flow studies produced a robust casing made from Hostaform C 2521. The demands made on such components are considerable. For example, the casing must withstand a pressure of 12 bar for 50 years and have correspondingly high creep and fatigue strength.

Other mouldings in the tap are also made from polymers. The shut-off lever and the connector consist of glass-fibre-reinforced Hostaform GV 1/30 owing to its high strength and rigidity. The slip properties of a Hostaform C 9021 K ball in the valve mechanism ensure long-term smooth operation. Finally, the retention clamps, which are subjected to extremely high mechanical loads, are injection moulded from 1140L4 reinforced with 40% glass fibre.In domestic water taps from Atlantic Plastics, a number of  materials ensure permanent smooth operation and freedom from leaks.

In Great Britain, domestic water consumption is usually estimated from the household size. However, the installation device for domestic water taps from the British company Atlantic Plastics allows simple connection of a water meter.

产品图片

东莞市龙辉祥塑胶原料公司是一家专业从事塑胶原料进口贸易公司。主营各国通用塑胶、工程塑胶、特种工程塑胶。公司以“诚信为本，创新求魂"的精神在客户中树立了良好的口碑。从进口到出口严格把关，可提供COA,SGS,UL黄卡!保证原厂原包!我是龙辉祥，期待你的来电! 

 

电  话：

传  真： 

手  机：

：罗（业务）

 

 

 

 

 

:罗长龙　
:　
传真号码:
地址:中国广东东莞市樟木头镇塑胶原料市场

销售RTP 1381 D TFE 13 SI 2 PPS其它产品

销售 PC EXL1112T Lexan
销售 PC EXL1112 Lexan
销售 PC EXL1036 Lexan
销售 PC EX9332T Lexan
销售 PC EX2079X Lexan
销售 PC EX2078X Lexan
销售 PC EX1632T Lexan
销售 PC EX1332T Lexan
销售 PC EX1036T Lexan