销售Fortron 1131L4 PPS

东莞龙辉祥塑胶原料公司自2002年6月成立以来,建立了完整的市场供应系统。以市场为导向，积极参与市场竞争，不断完善规范化管理，使企业经营规模不断发展壮大共同进步,共同发展，本公司*经营各国塑胶原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品级ABS、AS、PS、PP工程塑料：:COC镜头料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

Fortron 1131L4 PPS

f your design challenges require high temperature stability, broad chemical resistance, stiffness, strength and creep resistance at elevated temperature, consider Polyphenylene Sulfide （PPS）.

Fuel Cell End Plates

Even with automated machining, the two sets of plates can cost from $300 to $500. ’s development work suggests that integrated injection-molded plates combining end and insulating components may reduce plate cost to between $100 and $120 per stack while also reducing stack weight by at least 10 lb （4.95 kg）.Injection-molded end plates made from ’s polyphenylene sulfide （PPS） can provide significant cost and weight savings in proton exchange membrane （PEM） fuel cells.Design changes integrating the end plate and the adjacent insulating plate may reduce cost and weight as much as 90% compared to current fuel cell prototypes employing metal.A PEM fuel cell assembly contains a stack of about 200 series-connected cells. The stack is held together through bolting from the end plates to hold the bipolar plates in the stack together and compress the gaskets between them. Intervening insulating plates have bored manifold to feed hydrogen fuel, oxidizing air and cooling water to the stack, as well as to remove the water produced during cell operation.

PPS换热器

 侧面部分纳入水防冻剂的混合物的进口和出口连接。延伸服务温度高达140°C 只有聚苯硫醚具有必要的抗化学品。这是由水防冻液混合测试确定在150℃以上1000小时。聚苯硫醚是*的材料显示先前的力量。其优良的机械性能，如高强度值，弹性模量和低蠕变倾向，满足设计师的严格要求。聚苯硫醚的尺寸稳定性高，使得它能够满足此应用程序需要精细的公差。使用聚苯硫醚1140L4原因.借鉴他们的供热循环水，清新的空气在汽车中的供热单位往往纳入聚苯硫醚，从一个侧面部分。本方部分抵押的金属换热器，这是它周围的卷曲的边缘。

Aerospace Wing and Leading Edge Nose

PPS already had all the basic characteristics for use in aircraft construction – resistance to high temperatures and aggressive chemicals, hardness, impact strength, dimensional stability and inherent flame-retardancy. The trick was to create suitable structural elements embodying these attributes. This is done by extruding the PPS into film, combining it with chosen fibrous reinforcements and forming the final part under high pressure at 300°C （572°F）.Individual parts are then fabricated from the pressed composites and welded together in an autoclave to form the final component as one piece.Fiber-reinforced composites based on ’s high performance  polyphenylene sulfide （PPS） make an important contribution to weight reduction of the Airbus A340 and A380.This helps lower fuel consumption and increase range and passenger capacity.

产品图片

东莞市龙辉祥塑胶原料公司是一家专业从事塑胶原料进口贸易公司。主营各国通用塑胶、工程塑胶、特种工程塑胶。公司以“诚信为本，创新求魂"的精神在客户中树立了良好的口碑。从进口到出口严格把关，可提供COA,SGS,UL黄卡!保证原厂原包!我是龙辉祥，期待你的来电! 

 

电  话：

传  真： 

手  机：

：罗（业务）

 

 

 

 

 

:罗长龙　
:　
传真号码:
地址:中国广东东莞市樟木头镇塑胶原料市场

销售Fortron 1131L4 PPS其它产品

销售Fortron 1130L4 PPS
销售Fortron 1130L0 PPS
销售Fortron 1120L4 PPS
销售Fortron 1115L0 PPS
销售Fortron 0335 PPS
销售Fortron 0320 PPS
销售Fortron 0317 PPS
销售Fortron 0309 PPS
销售Fortron 0300 PPS