注塑机 挤出机 造粒机 吹膜机 吹塑机 吹瓶机 成型机 吸塑机 滚塑机 管材生产线 板材生产线 型材生产线 片材生产线 发泡设备 塑料压延机
东莞市恒隆塑胶有限公司
产品名称:特种料:PFA,日本杜邦,416HP( 产品说明) 所在地区:日本 产品报
价:面议
特种料:PFA,日本杜邦,416HP( 产品说明)-详细说明:
本公司 可以免费提供各种材料物性及各种材质认证 如:SGS UL MSDS ROHS MDS 等证明 : 通过这些链接您能够访问供应商资料。我们尽量保证 准确数据资料; UL 黄卡含有 UL 验证的易燃性和电气特性物性说明
Teflon® PFA 340 | DuPont Fluoropolymers | PFA | |
Teflon® PFA 345 | DuPont Fluoropolymers | PFA | |
Teflon® PFA 350 | DuPont Fluoropolymers | PFA | |
Teflon® PFA 416HP | DuPont Fluoropolymers | PFA | |
Teflon® PFA 440HPA | DuPont Fluoropolymers | PFA | |
Teflon® PFA 440HPB | DuPont Fluoropolymers | PFA | |
Teflon® PFA 445HP | DuPont Fluoropolymers | PFA | |
Teflon® PFA 450HP | DuPont Fluoropolymers | PFA | |
Teflon® PFA 451HP | DuPont Fluoropolymers | PFA | |
Teflon® PFA 940HP Plus | DuPont Fluoropolymers | PFA | |
Teflon® PFA 945HP Plus | DuPont Fluoropolymers | PFA | |
Teflon® PFA 950HP Plus | DuPont Fluoropolymers | PFA | |
Teflon® PFA 951HP Plus | DuPont Fluoropolymers | PFA | |
Teflon® PFA D 335D | DuPont Fluoropolymers | PFA | |
Teflon® PFA TE9724 | DuPont Fluoropolymers | PFA | |
Teflon® PFA TE9725 | DuPont Fluoropolymers | PFA |
物性说明
产品说明 | ||||
For inventory control purposes product name may be followed by an X. Products labeled PFA 416 HP and PFA 416 HP X are equivalent and all information in this document is applicable to both. Typical Application Applications for DuPont™ Teflon ® PFA 416HP include high performance thin-wall wire coatings; intricate injection molded parts for production of chemicals where purity in the parts-per-billion range is needed; semiconductor components and electronic parts; and fluid handling systems for high performance chemical filters. With a typical melt flow rate of 42, Teflon ® PFA 416HP resin is ideally suited for applications requiring a high processing speed and very low viscosity. Description DuPont™ Teflon ® PFA 416HP is a special purpose fluoroplastic resin available in pellet form. This resin has a higher melt flow rate (typical MFR of 42) than most other PFA fluoroplastic resins, which permits higher extrusion speed and easier processing, making Teflon ® PFA 416HP a cost-effective alternative for producing thin-wall and complicated articles. Unlike other high melt flow rate polymers, Teflon ® PFA 416HP is specially formulated to provide a high melt flow rate for processing ease, while still providing good flexural properties and stress-crack resistance. These unique properties, coupled with the resin's high thermal stability, enable thin coatings of ultra-fine wires and injection molding of complex parts. Table 1 shows the typical property data for Teflon ® PFA 416HP. The enhanced purity of Teflon ® PFA 416HP makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. Teflon ® PFA 416HP contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. Teflon ® PFA 416HP combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon ® PFA 416HP can be used to improve processing rates, and allows intricate electronics to be insulated with an extremely thin coating and still withstand soldering. Properly processed products made from neat Teflon ® PFA 416HP resin provide the superior properties typical of the fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance. In a flame situation, products of Teflon ® PFA 416HP resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke. Teflon ® PFA 416HP meets the requirements of ASTM D3307, Type IX | ||||
总体 | ||||
材料状态 |
| |||
资料 1 |
| |||
搜索 UL 黄卡 |
| |||
供货地区 |
| |||
性能特点 |
| |||
用途 |
| |||
机构评级 |
| |||
形式 |
| |||
加工方法 |
|
物理性能 | 额定值 | 单位制 | 测试方法 |
比重 | 2.15 | ASTM D792 | |
熔流率 (372°C/5.0 kg) | 42 | g/10 min | ASTM D3307, ISO 12086 |
吸水率 (24 hr) | < 0.030 | % | ASTM D570 |
硬度 | 额定值 | 单位制 | 测试方法 |
硬度计硬度 (邵氏 D) | 55 | ASTM D2240, ISO 868 |
机械性能 | 额定值 | 单位制 | 测试方法 |
抗张强度 (73°F) | 3630 | psi | ASTM D3307, ISO 12086 |
伸长率 (断裂, 73°F) | 350 | % | ASTM D3307, ISO 12086 |
弯曲模量 (73°F) | 100000 | psi | ASTM D790, ISO 178 |
热性能 | 额定值 | 单位制 | 测试方法 |
熔融温度 | 581 | °F | ASTM D4591 |
电气性能 | 额定值 | 单位制 | 测试方法 |
体积电阻率 | 1.0E+18 | ohm·cm | ASTM D257, ISO 1325 |
介电强度 | |||
0.00984 in 2 | 2000 | V/mil | ASTM D149 |
0.00984 in | 2000 | V/mil | IEC 60243-1 |
介电常数 (1 MHz) | 2.03 | ASTM D150, IEC 60250 | |
耗散因数 (1 MHz) | < 0.00020 | ASTM D150, IEC 60250 | |
可燃性 | 额定值 | 单位制 | 测试方法 |
UL 阻燃等级 3 | V-0 | UL 94 | |
极限氧指数 | > 95 | % | ASTM D2863, ISO 4589-2 |
补充信息 | 额定值 | 单位制 | 测试方法 |
Critical Shear Rate (702°F) | 12.0 | sec^-1 | |
MIT Folding Endurance 4 (7.9 mil) | 4.0E+3 | Cycles | ASTM D2176 |
Weather and Chemical Resistance: Outstanding |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
塑料机械网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份