| 项目Item | 单位Unit | 参数Data |
| 合模力Max. clamping force | KN | 3800 |
| 移模行程Max. opening force | mm | 680 |
| 拉杆有效间距（V×H）Space between tie bars | mm | 680×680 |
| 允许的模厚（min-max）Mould height | mm | 250-710 |
| 模板zui大开距Max. daylight | mm | 1390 |
| 液压顶出力Ejector force | KN | 90.7 |
| 液压顶出行程Ejector stroke | mm | 170 |
| 液压顶出杆的总数Ejector quantity | | 13 |
| 螺杆的直径Screw diameter | mm | 65 | 70 | 75 |
| 螺杆的长径比Screw L/D ratio | L/D | 22.6 | 21 | 19.6 |
| 理论注射容积Theoretical shot volume | cm3 | 1061 | 1231 | 1413 |
| 注射质量（PS料）Plasticising weight（PS） | g | 966 | 1120 | 1286 |
| 注射压力Injection pressure | Mpa | 203 | 175 | 152 |
| 理论注射速率（PS料）Theoretical injection rate（PS） | g | 308 | 357 | 410 |
| 塑化能力（PS料）Plasticising capacity（PS） | g/s | 50.6 | 60.5 | 71.5 |
| 螺杆驱动扭矩Screw torque | N.m | 2860 |
| 螺杆zui高转速Max. screw rotate speed | r/min | 150 |
| 注射行程Injection stroke | mm | 320 |
| 移座推力Carriage push force | KN | 110.5 |
| 油泵电动机功率Pump motor power | KW | 37 |
| 油泵zui高压力Pump pressure | Mpa | 16 |
| 料筒加热功率Heating power | KW | 25 |
| 加热区段Heating zone | | 5 |
| 机器的外形 （L×W×H）Size | m | 6.8×2.0×2.3 |
| 机器的净重 Net weight | t | 15 |
| *型号International designation | | 3800-2150 |
