热释电能量传感器

以色列OPhir PE9电能量传感器

	热释电激光能量传感器 – 0.2μJ 到 10J Ophir热释电激光能量传感器采用创新的技术，能在范围广泛的条件下得到精确和可重复的测量，包括到高达 5ms 的长脉冲和高达 25KHz 的重复频率。 高能量热释电传感器 – 50μJ 到 40J，孔径zui大 95mm 与上面的热释电传感器类似，但配备有散射片，因此能测量高能量和平均功率。

以色列OPhir PE9电能量传感器

Model PE9-C PE9-ES-C

Use Very Sensitive Most Sensitive

Aperture mm φ8 φ8

Absorber Type metallic metallic

Spectral Range μm (a) 0.15 - 12 0.15 - 12

Surface Re?ectivity % approx. 50 50

Calibration Accuracy +/-% (a) 3 3

Max Pulse Width Setting (d) 1μs 2μs 20μs 1μs 2μs 20μs

Energy Scales 1mJ to 2μJ 1mJ to 2μJ 1mJ to 20μJ 200μJ to 200nJ 200μJ to 200nJ 200μJ to 2μJ

Lowest Measurable Energy μJ (b, c) 0.5 <0.2 0.5 0.1 <0.05 0.1

Max Pulse Width μs 1 2 20 1 2 20

Maximum Pulse Rate pps 25kHz 15kHz 10kHz 25kHz 15kHz 10kHz

Noise on Lowest Range μJ 0.04 0.05 0.1 0.01 0.01 0.02

Additional Error with Frequency % ±1% to 15kHz, 

±6% to 25kHz

±1% to 15kHz ±1% to 10kHz ±1.5% to 25kHz ±1.5% to 15kHz ±1.5% to 10kHz

Damage Threshold J/cm2

<100ns 0.1 0.1

1μs 0.2 0.2

300μs 3 3

Linearity with Energy (b) ±1% ±1.5%

Maximum Average Power W 2 2

Maximum Average Power Density W/cm2 30 30

Fiber Adapters Available (see page 78) ST, FC, SMA, SC ST, FC, SMA, SC

Weight kg 0.25 0.25

Version

Part Number 7Z02933 7Z02949

Note: (a) Calibrated curve is checked and adjusted at 

the following wavelengths (μm) 

For other wavelengths in the curve there is additional 

calibration error as stated.

0.193, 0.355, 1.064, 1.48-1.6 

240-800nm add ±4%, 2-3μm add ±8%, 10.6μm add ±15%.

0.355, 1.064, 1.48-1.6

240-800nm add ±4%, 2-3μm add ±8%, 10.6μm add ±15%.

<240nm not calibrated

Note: (b) For >7% (>10% for PE9-ES-C) of full scale, with the "user threshold" setting set to minimum. For other settings, the spec is for >7%/>10% of full scale or greater than twice the "user 

threshold", whichever is greater.

The user threshold is available with Nova II, Vega, StarLite or Juno. For other meters, the threshold is set to minimum and the linearity spec is >10% of full scale. The PE-C series will only operate 

with Nova or Orion meters with an additional adapter Ophir P/N 7Z08272 (see page 79). The adapter can introduce up to 1% additional measurement error.

 The user threshold feature allows adjustment of the internal threshold up to 25% of full scale if desired to avoid false triggering in noisy environments. The user threshold setting represents 

the approximate minimum energy for pulse widths below ~50% of the pulse width setting. For longer pulse widths, the actual minimum may be higher. For highest accuracy, it is 

recommended to zero the sensor against the meter the ?rst time it is used with a particular meter. For further information, see the FAQs on our Website.

Note: (c) A shock absorbing mounting post is available for situations in which sensor is mounted on a surface subject to shock or vibration. This can prevent false triggering and allow working 

at lower minimum energies (see accessory page 79 for mounting post).

Note: (d) With the Laserstar, Pulsar, USBI, Quasar and Nova/Orion with adapter, only 2 out of 3 pulse widths settings are available; the 1μs (displayed as “10μs”) and the 2μs (displayed as “20μs”).

 香港奥德赛创科技有限公司产品主要有安规检测类产品、环境类试验箱、*试验机、疲劳试验机、燃烧阻燃类试验设备各类检测仪器，并代理了美国ED&D、日本KYOKUTOU极东、日本极东、日本志贺、日本爱模、日本TEAC、日本LINIAX、日本日本NMB、日本NoiseKen、美国MONROE、美国ELECTRO-LITE、以色列ophir、德国WAZAU、德国PTL、德国PTI、OPHIR等检测仪器。

深圳市奥德赛创精密仪器有限公司的诚信、实力和产品质量获得业界的认可。
欢迎各界朋友莅临参观、指导和业务洽谈。请销售总监：苏曼 
： 
：  
:
:
web:  
地址：