塑料机械网
详细介绍
| 项目 | Item | 单位 | ZSQ 170 | |||||
| 项目 | Item | 单位 | 主注射系统 | 副注射系统 | ||||
| 注射装置 | INJECTION UNIT | A | B | C | A | B | C | |
| 螺杆直径 | Screw diameter | mm | 42 | 45 | 50 | 26 | 30 | 32 |
| 螺杆长径比 | Screw L/D ratio | L/D | 21.4 | 20 | 18 | 25.4 | 22 | 20.6 |
| 理论注射容量 | Shot volume(theoretical) | cm3 | 311 | 357 | 441 | 69 | 92 | 104 |
| 注射重量 | Injection weight(ps) | g | 283 | 325 | 402 | 62.8 | 83 | 95 |
| 注射速率 | Injection rate | g/s | 138 | 160 | 196 | 55 | 73 | 83 |
| 注射压力 | Injection pressure | Mpa | 203 | 177 | 143 | 227 | 170 | 150 |
| 螺杆转速 | Screw speed | rpm | 180 | 185 | ||||
| 锁模装置 | CLAMPING UNIT | |||||||
| 锁模力 | Clamping force | kN | 1700 | |||||
| 移模行程 | Open stroke | mm | 435 | |||||
| 拉杆间距(宽×高) | Space between tie bars(W×H) | mm | 470×470 | |||||
| 模厚 | Max.Mold height | mm | 520 | |||||
| 最小模厚 | Min.Mold height | mm | 180 | |||||
| 顶出行程 | Ejector stroke | mm | 140 | |||||
| 顶出力 | Ejector stroke | kN | 50 | |||||
| 其他 | OTHERS | |||||||
| 油泵压力 | Max Pump pressure | kW | 16 | 16 | ||||
| 油泵电机功率 | Pump motor power | kW | 18.5 | 7.5 | ||||
| 电热功率 | Heating power | kW | 12.3 | 6.3 | ||||
| 外形尺寸(长×宽×高) | Machine dimension(L×W×H) | m | 5.04×2.93×2.12 | |||||
| 油箱容积 | Olitank cubage | L | 300 | |||||
| 机器重量 | Machine weight | t | 6 | |||||
未找到相应参数组，请于后台属性模板中添加
在常规机上可配置不同规格的平面转盘,可根据客户需求定制。
Equipped rotary platen with different specifications on the standard machine according to customer’s needs.
造模简易，成本低，生产快捷。
Simplify mold design enabling reduction in production cost and lead time.
安装在共塑注塑机上，接上机器提供的液压动力及控制线路，转盘可作180°往复旋转。
The platen can be rotated 180° to and fro when it installed on co-injection machine with turning on hydraulic power and control circuit.
内置两组运水流道，在盘面上提供运水喉咀。
Two units of water channels with water outlet installed on the platen surface.
暂未实现,敬请期待
暂未实现,敬请期待
塑料机械网