| 型号规格Specifications | 单位 UNIT | CH360F |
| *号International size rating | 2040 |
| 注射装置INJECTION UNIT | | A | B | C | D |
| 螺杆直径 Screw diameter | mm | 60 | 65 | 70 | 75 |
| 螺杆长径比Screw L/D ratio | L/D | 23 | 22 | 20 | 19 |
| 理论注射容积Theoreticai shot volume | cm3 | 990 | 1161 | 1347 | 1546 |
| 注射量 Shot weight(PS) | g | 901 | 1057 | 1226 | 1407 |
| OZ | 31.8 | 37.3 | 43.2 | 49.6 |
| 注射压力Injection pressure | Bar | 2069 | 1763 | 1520 | 1324 |
| 注射速率Injection rate(PS) | g/s | 235 | 275 | 319 | 367 |
| 射胶行程Injection stroke | mm | 350 |
| 螺杆转速Max.screw speed | rpm | 154 |
| 塑化能力 Plasticizing capacity(PS) | g/s | 51.1 | 56.7 | 64.4 | 67.5 |
| 射嘴接触力Nozzle sealing force | KN | 141 |
| 锁模装置 CLAMPING UNIT | | |
| 锁模力 Clamping force | KN | 3600 |
| 开模行程 Opening stroke | mm | 660 |
| 拉杆内间距Distance between tie-bars | mm | 730x680 |
| 小模具尺寸Min mould dimension | mm | 475x445 |
| 小模厚Max.mold height | mm | 680 |
| 小模厚 Min.mold height | mm | 250 |
| 模板大开距AX.Dalylight | mm | 1340 |
| 顶出行程 EjMector stroke | mm | 160 |
| 顶出力 Ejector force | KN | 70 |
| 顶出数No.of ejector pins | PCS | 12+1 |
| 其它 OTHERS | | |
| 系统压力System pressure | Mpa | 16 |
| 油泵排量 Hydraulic pump capacity | CC | 125 |
| 电马达功率Drive mootor power | kw | 37 |
| 电热功率Heator Power | kw | 22.8 |
| 加热段数 No.of heater zones | pcs | 4+1 |
| 外形尺寸 Machine dimensions(LxH) | m | 6.9x1.9x2.35 |
| 理论机重Machine weight | Tom | 14 |
| 容积Oil tank capacity | L | 550 |
| 模板正面尺寸图 Platen dimensions | |
| 模板侧面尺寸图 Mould space dimensions |
