| 型号规格 Specifications | 单位 UNIT | CH1000F |
| *号International size rating | 7040 |
| 注射装置 INJECTION UNIT | | A | B | C |
| 螺杆直径 Screw diameter | mm | 95 | 105 | 115 |
| 螺杆长径比Screw L/D ratio | L/D | 23 | 21 | 19 |
| 理论注射容Theoreticai shot volume | cm3 | 3757 | 4589 | 5505 |
| 注射量 Shot weight(PS) | g | 3419 | 4176 | 5010 |
| OZ | 120.6 | 147.3 | 176.7 |
| 注射压力 Injection pressure | Bar | 1877 | 1536 | 1281 |
| 注射速率 Injection rate(PS) | g/s | 680 | 831 | 997 |
| 射胶行程 Injection stroke | mm | 530 |
| 螺杆转速 Max.screw speed | rpm | 105 |
| 塑化能力 Plasticizing capacity(PS) | g/s | 78.5 | 95.0 | 106.5 |
| 射嘴接触力Nozzle sealing force | KN | 141 |
| 锁模装置 CLAMPING UNIT | | |
| 锁模力 Clamping force | KN | 10000 |
| 开模行程 Opening stroke | mm | 1120 |
| 拉杆内间距Distance between tie-bars | mm | 1160x1080 |
| 小模具尺寸Min mould dimension | mm | 760x705 |
| 小模厚 Max.mold height | mm | 1120 |
| 小模厚 Min.mold height | mm | 450 |
| 模板大开距MAX.Dalylight | mm | 2240 |
| 顶出行程Ejector stroke | mm | 280 |
| 顶出力 Ejector force | KN | 186 |
| 顶出数 No.of ejector pins | PCS | 16+1 |
| 其它 OTHERS | | |
| 系统压力 System pressure | Mpa | 16 |
| 油泵排量 Hydraulic pump capacity | CC | 163+100 |
| 电马达功率 Drive mootor power | kw | 55+37 |
| 电热功率 Heator Power | kw | 65 |
| 加热段数 No.of heater zones | pcs | 5+1 |
| 外形尺Machine dimensions(LxH) | m | 11.5x2.5x2.75 |
| 理论机重 Machine weight | Tom | 46 |
| 容积 Oil tank capacity | L | 1300 |
| 模板正面尺寸图 Platen dimensions | |
| 模板侧面尺寸图 Mould space dimensions |
