目录:广东乐善智能装备股份有限公司>>吹瓶机U型机系列>> SCJ-90-30U2X2.15FPE全自动一出二吹瓶机 中空吹塑机 高压吹瓶机U型机系列(直线导轨）
| 机型 | SCJ-90-30U2X2.15F | ||||
| 项目 | Items | 单位 Units | 参数Specification | ||
| 基本参数 Specification | 类别 | Category | / | 单层+液位线 1layer with view stripe | |
| 制品大容积 | Max. Blow Volume | （L） | 5 | ||
| 适用原料 | Material | / | PE,PP | ||
| 模头坯料数量 | Qty.Of Die Head | / | 2 | ||
| 常用模头中心距 | Die Head distance (cee to cee) | （mm） | 250,280 | ||
| 机器净重约 | Net Weight | （kg) | 15000 | ||
| 机器外形尺寸 | Machine Dimension | （m，L×H×W） | 5.1*3.9*4.1 | ||
| 模头 Die Head | 模头加热段数 | Die Head Heating Zone | / | 5 | |
| 模头加热功率 | Die Head Heating Power | (kW) | 12.5 | ||
| 锁模架系统 Carriage system | 模架数量 | Qty.Of Station | / | 2 | |
| 小合模距 | Min Clamping Distance Of Mold | mm | 250 | ||
| 大开模距 | Max Clamping Distance Of Mold | mm | 650 | ||
| 模板尺寸 | Effective Dimension Of Mold Plate | mm W×H | 600X500 | ||
| 摆架行程 | Carriage Stroke | (mm) | 750 | ||
| 锁模力 | Clamping Force | kN | 196 | ||
| 挤出系统 Extruder Unit | 螺杆直径 | Extruder Diametre | (mm) | 90 | 30 |
| 螺杆长径比 | Extruder Length/Diametre Ratio | / | 24 | 24 | |
| 螺杆转速 | Extruder Rotating Speed | (rpm) | 10-66 | 10~21 | |
| 大塑化能力 | Max Extrusion Capacity | (kg/h) | 160 | 4 | |
| 挤出电机额定功率 | Extruder Motor Rated Power | (kW) | 37 | 2.2 | |
| 机筒加热段数 | Barrel Heating Zone | / | 4 | 2 | |
| 机筒加热功率 | Barrel Heating Power | (kW) | 17 | 2.6 | |
| 冷却风机功率 | Cooling Fan Power | kW | 0.72 | / | |
| 动力系统 Power Unit | 油泵电机额定功率 | Oil Pump Motor Rated Power | kW | 15 | |
| 液压系统额定工作压力 | Hydraulic System Rated Wong Pressure | Mpa | 16 | ||
| 气动系统额定工作压力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | ||
| 水冷系统额定工作压力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | ||
| 通用制品耗气量（压缩后） | Universal product air consumption(compressed) | m³/h | 15 | ||
| 热切刀变压器功率 | Hot Cutter Power | kW | 2 | ||
| 装机总功率I | Total Installed Power I | kW | 89.02 | ||
| 备注 Remarks | 液压油牌号/油箱容积 | Hydraulic oil NO. / tank volume | L | 46#/300 | |
| 冷水机选型（风冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | ||
| 空压机选型（加储气罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | ||
| 备注/Remarks： | 以上机型均可叠加100点壁厚控制系统，叠加后改变的参数如下/All the machines above can be optionally equipped with 100 points parison cool system,parameters would be changed as below: | ||||
| 叠加壁厚控制后 After with 100points parison cool | 机型 | Model | / | SCJ-90U-30+S2X2.15F | |
| 壁厚油泵电机额定功率 | Parison Motor Rated Power | kW | 5.5 | ||
| 装机总功率II | Total Installed Power II | kW | 94.52 | ||
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm) | |||
3
塑料机械网