| 系统 System | 项目 Item | 单位 Unit | 基本参数 Basic paramters |
| MD-90H |
| 基本规格 Basic Spec | 适用原料 Plastic fit for | | PE |
| 大制品容量Max hollow product volume | L | 60 |
| 机头数Diehead amount | set | 1 |
| 机器外型尺寸（长x宽x高）Size(LxH) | M | 5.42×3.68×4.2 |
| 机器重量Weight | ton | 16 |
| |
| 锁模系统 Clamping System | 锁模力Clamping force | kN | 320 |
| 模板间距Template distance | mm | 450-1050 |
| 模板行程Template stroke | mm | 600 |
| 大模具尺寸(宽x高)Max mould size(H) | mm | 800×920 |
| 模具厚度Mould thickness | mm | 460-600 |
| |
| 挤出系统 Extrusion System | 螺杆直径Screw Dia | mm | 90 |
| 螺杆长径比Screw L/D ratio | L/D | 26 |
| 塑化能力（HDPE）Plasticizing capacity (HDPE) | Kg/h | 160 |
| 螺杆加热段数Screw heating zone | zone | 5 |
| 螺杆加热功率Screw heating power | kW | 21 |
| 螺杆风机功率Screw fan’s power | kW | 1 |
| 挤出电机功率Extrusion motor’s power | kW | 45 |
| | |
| 模头 Die head | 模头加热段数Diehead heating zone | zone | 4 |
| 模头加热功率Diehead heating power | kW | 22 |
| 挤出口模大直径Sprue-die dia(max) | mm | 250 |
| 储料容积Accumulator Volume | L | 6.6 |
| |
| 能耗 Power | 总装机功率General power | kW | 110.7 |
| 油泵电机功率Oil-pump motor power | kW | 30 |
| 气源压力Air pressure | Mpa | 0.8 |
| 平均能耗Average power | kW | 62 |
| 压缩空气用量Compressed air dosage | m3min | 1 |
| 冷却水用量Cooling water dosage | L/min | 80 |
