MGE工程塑料合金耐磨滑板桥梁垫板 返回列表页

MGE工程塑料合金耐磨滑板桥梁垫板的性能
1、MGE 板具有良好的弹性和抗冲击性，能够较好地消除轨道不平造成的局部高压带来的各种危害；
2、MGE 板摩擦系数低、动静摩擦系数相差小，不会出现爬行现象，运行平稳：
3、MGE 板自润滑免维护，即使在干摩擦条件下也可正常使用：
4、MGE板承载能力大、抗震性能好，既能承受较大的沖击载荷，也能承受冲击载荷，在受到大的负荷时，具有很好的柔韧性和自恢复性；
5、MGE 板耐磨损、耐腐蚀，比磨损率为 107mg/N-m,较其它非金属材料提高了一个数量级，使用寿命大大提高。在电场、化学场、力场及酸、碱、盐介质条件下
不腐蚀、不溶胀；
6、 MGE 板不剥落、抗剪能力强：
7、MGE 板吸水率极低、尺寸稳定性好。

MGE滑板的主要优点
1、良好的耐磨性，极低的磨损率

2、自润滑性能好，縻擦系数小
3、抗冲击强度高，韧性好。
4、抗化学腐蚀性优异，可耐（除浓硫酸，浓硝酸，少数有机溶剂以外）几乎所有的酸，碱，盐介质。
5、无毒，无味，无渗透出物。
6、具有弹性，吸振性，自恢复好，吸水率极低。
7、优良的耐低温性能，即便在-176 摄氏度时也不脆裂

MGE板的用途有哪些呢
1、 MGB 材料多用于大型重载、有腐蚀不易加油或重大型水利工程项目的工况。如弧门支铰轴承，大载荷滑轮轴承、止推轴承、关节轴承、滑板、闸门滑块、人字门支撑轴承、水轮机导叶轴承等。

2、MGC 材料主要应用在一些大中型载荷的轴承、滑板或滑块、止推环等。
3、MGD材料主要应用在一些中小型载荷的轴承、滑板或滑块、止推环等

4、 MGE 材料用于坞门承压垫、MGE 轴套桥城防撞板、材料摩擦系数低?动静摩擦系数相近，可用于平移大型重物的滑板。
5、 MGN 材料用于钢丝绳铰轮、托银、齿轮、定位轮、行走轮等。

6、MGA工程塑料合金板使用状况:由于该承载能力大、抗震性能好，既能承受较大的冲击载荷，也能承受冲击载荷，在受到大的负荷时，具有很好的柔韧性和自恢复性;而且本身具有一定的自润滑性,所以不用在干态不加油的状态下都能很好的应用 

Performance of MGE skateboard products

1. MGE board has good elasticity and impact resistance, which can effectively eliminate various hazards caused by local high pressure caused by uneven tracks;

2. MGE board has low friction coefficient, small difference in dynamic and static friction coefficients, no crawling phenomenon, and smooth operation:

3. MGE board is self-lubricating and maintenance free, and can be used normally even under dry friction conditions:

4. MGE board has a large load-bearing capacity and good seismic performance, which can withstand both large impact loads and impact loads. When subjected to large loads, it has good flexibility and self recovery;

5. MGE board is wear-resistant and corrosion-resistant, with a specific wear rate of 107mg/N-m, which is an order of magnitude higher than other non-metallic materials and greatly improves its service life. Under conditions of electric field, chemical field, force field, and acid, alkali, and salt media

Non corrosive and non swelling;

6. MGE board does not peel off and has strong shear resistance:

7. MGE board has extremely low water absorption and good dimensional stability.

The main advantages of MGE skateboarding

1. Good wear resistance, extremely low wear rate

2. Good self-lubricating performance and low friction coefficient

3. High impact strength and good toughness.

4. Excellent chemical corrosion resistance, able to withstand almost all acidic, alkaline, and salt media except for concentrated sulfuric acid, concentrated nitric acid, and a few organic solvents.

5. Non toxic, odorless, and non permeable.

6. Has elasticity, vibration absorption, good self recovery, and extremely low water absorption rate.

7. Excellent low-temperature resistance, not brittle even at -176 degrees Celsius

What are the uses of MGE boards

1. MGB materials are commonly used in large heavy-duty, corrosive and difficult to refuel, or in major hydraulic engineering projects. Such as radial gate hinge bearings, heavy-duty pulley bearings, thrust bearings, joint bearings, sliding plates, gate sliders, herringbone gate support bearings, turbine guide vane bearings, etc.

2. MGC materials are mainly used in bearings, sliding plates or sliders, thrust rings, etc. for some large and medium-sized loads.

3. MGD materials are mainly used in bearings, sliding plates or sliders, thrust rings, etc. for some small and medium-sized loads

4. MGE material is used for dock gate pressure pads, MGE shaft sleeve bridge city anti-collision plates, and has a low friction coefficient? The dynamic and static friction coefficients are similar and can be used for sliding large heavy objects on skateboards.

5. MGN material is used for steel wire rope hinges, pallets, gears, positioning wheels, walking wheels, etc.

6. Usage of MGA engineering plastic alloy plate: Due to its large load-bearing capacity and good seismic performance, it can withstand both large impact loads and impact loads. When subjected to large loads, it has good flexibility and self recovery; Moreover, it has a certain degree of self-lubricating properties, so it can be well applied without the need for dry or non lubricated conditions