主要特性与技术指标
以 2.5 GSa/s 采样率和 14 位垂直分辨率生成 330 MHz 脉冲和 500 MHz 函数/任意波形；
用于高斯白噪声的可选波峰因数帮助工程师确定极限测试中应用到器件上的失真量，以便符合各种串行总线的标准；
无毛刺定时参数变化支持工程师在不需要漏失信号或毛刺信号的条件下改变频率，并能实现连续工作，而无需重启或重置被测件；
任意比型使用简单的码型设置显示通道电容负载。测试设计极限不再需要复杂的测量设置步骤。
330 MHz 脉冲、500 MHz 正弦波、660 Mbit 码型
波形生成和编辑
使用 33503A BenchLink Waveform Builder Pro 软件无需烦琐编程即可获得*的信号生成/编辑功能
描述
高精度脉冲发生器使用通用信号发生器增强自身功能，可提供失真功能来对器件进行强化测试
任意比特形状码型发生器用于高达 660 Mbit/s 的理想和失真码型
函数任意发生器提供各种波形和调制功能，可调整信号以适应器件要求
噪声发生器结合了两种必需的情况：
随机噪声和具有极长重复率的可重复噪声，可用于简单的故障识别
Keysight 81160A 用于许多不同的测量应用中
– 1 µHz – 330 MHz pulse generation with variable rise/fall time
– 1 µHz – 500 MHz sine waveform output
– 14-bit, 2.5 GSa/s arbitrary waveforms
– Up to 256k samples deep arbitrary waveform memory per channel
– Pulse, sine, square, ramp, noise and arbitrary waveforms
– Noise, with selectable crest factor, and signal repetition time of 20 days
– FM, AM, PM, PWM, FSK modulation capabilities or 2 channel, coupled and uncoupled
– Differential outputs
– Amplitude: 50 Ω into 50 Ω 50 mVPP to 5 VPP，50 Ω into open 100 mVPP to 10 VPP
– Voltage window: 50 Ω into 50 Ω ± 5 V， 50 Ω into open ± 10 V
– Glitch-free change of timing parameters (delay, frequency, transition time, width, duty cycle)
– Programming language compatible with Keysight 81101A, 81104A, 81105A, 81110A, 81130A and 81150A
– ISO 17025 and Z540.3 calibration
– LXI class C (rev 1.1) compliant
– Optional pattern generator:
– Ideal and arbitrary bit shaped pattern up to 330 Mbit/s (Option 330) or 660 Mbit/s (Option 660)
– Two, three or four level signals
– PRBS up to 231
– 4 Mbit pattern memory for the 1-channel instrument and 2 Mbit per channel for the 2-channel instrument
– Pass through pattern for combined and physical and protocol test up to 10 Mbit/s 
