注塑机 挤出机 造粒机 吹膜机 吹塑机 吹瓶机 成型机 吸塑机 滚塑机 管材生产线 板材生产线 型材生产线 片材生产线 发泡设备 塑料压延机
上海尔迪仪器科技有限公司
上海尔迪仪器科技有限公司
JEIOTECH搅拌器置顶搅拌器（液晶屏显示PID控制型）MSH-0512
Mixers OverheadStirrers (Advanced Model)
搅拌器置顶搅拌器（型）
Overhead Stirrers (Advanced Model)
置顶搅拌器（型）
Ideally perform your professional stirring tasks requiring highfunctionality, safety, and longevity.
具有多功能、安全和长寿命特点，是实验室的理想选择。
Intelligent speed controller enablesreproducible results under varying viscosity condition.
智能速度控制器使得在各种粘度条件下都能保持状态。
your high standard sitrring needs can bemet by our considerate design and safety features.
人性化的设计和多种安全功能能够满足用户的高标准要求。
型号
MSH-0512
Features
特点
Features
特点
· Years of vibration-free and silent operation.
· 长年保持无振动和式操作。
- Equipped with a maintenance-free BLDC motor to generate smooth, quiet, andyet powerful stirring.
· -免维护的直流无刷电机具有平稳、、和强劲有力的特点。
· Maintenance of constant motor speed byPID feedback control system even under conditions of changing viscosity.
· 即使在粘度变化的条件下，PID反馈控制系统也能够使电机保持恒定不变的速度。
· Powerful torque capable of handling highviscosity tasks. In addition, the varying motor torque is indicated on displayin real time.
· 大扭矩能够满足高粘度要求，电机扭矩可以实时在显示屏显示。
· Motor temperature condition is indicatedon display by three different colors to protect motor.
· 电机温度可以以三种不同颜色显示在显示屏上，可以保护电机。
· Stirring directions are selectabledepending on each impeller’s shape and the set direction is visible on display.
· 显示屏可以设置逆时针或者顺时针方向旋转满足不同形状叶轮的要求，并且能在显示屏显示。
· Screen lock function prevents accidentalchanges during operation.
· 屏幕锁定功能，防止未经的更改。
· Best effort function Intelligentlymanages its stirring speed to keep stirring even workload is out of itscapacity.
· 即使超过工作负荷，系统智能调节转速继续工作。
· Safety features against overload andoverheating.
· 有超载和过热安全保护功能。
- When it comes to heavy workload, it tries to activate best effort function.But if it determines that performing the work is harmful for it, than it stopsstirring.
· -当系统感应到超负荷工作时，会自动以状态运行。但是当感应
- Equiped with a mini fan inside to minimize overheating of the motor.
· -内部有迷你风扇可以给电机散热。
· Prevention of accidental spills orsplashes thanks to microprocessor controlled smooth start and stop functions.
· 微处理控制器平稳的启动和停机
· Separated adapter from the main bodyminimizes the risks of electrical hazards to the users.
· 独立于主机的电源适配器，可以减少对操作者的电气危害。
· Built-in USB port for external controlａnd data collection. (Lab Companion software required)
· 内置USB接口，可以外联控制和数据收集。（需要软件）
Specifications
技术参数
Model 型号 | MSH-0512 | |
Technical Data 技术参数 | Speed Control 速度控制系统 | PID feedback control PID反馈控制系统 |
Speed Range (rpm) 转速范围(rpm) | 50 ~ 1,200 50 ~ 1,200 | |
Display 显示器 | Digital-LCD 数字显示-LCD | |
Stirring Capacity, Max. 搅拌量(L, 水) | 20 | |
Torque, Max. (N•cm) 扭矩(N•cm) | 41.6 | |
Motor Rating Output (W) 电机输出功率(W) | 50 | |
General Data 其它参数 | Body Material 主机材质 | Aluminum + PP 铝 + PP |
Dimension 主机尺寸(mm / inch, W×D×H) | 80x181x235 / 3.14×7.13×9.25 | |
Net Weight (Kg / lbs) 净重(Kg / lbs) | 3.1 / 6.83 | |
Electrical Requirements 电源要求 | AC 100 ~ 240V, 50 / 60Hz | |
Safety Device 安全保护 | Thermal protection, Current protection, Emergency stop, Automatic speed control 加热保护，电流过载保护，紧急停机，自动调速 | |
Shaft Die, Max (mm / Inch) 夹轴尺寸(mm / Inch) | 3 ~ 10 / 0.12 ~ 0.39 | |
Protection Class 保护等级(DIN EN 60529) | IP20 | |
Cat. No. 货号 | KR plug 韩式插头 | AAH371415K |
US plug 美式插头 | AAH371415U | |
※ Permissible environmental conditions: temperature (5-40℃) ａnd relative humidity (up to 80%).
※工作温度：5℃ - 40℃，相关湿度：80%
※ Protection class according to DINEN 60529: waterproof, Dust production index based onthe test level.
※ 保护等级符合DIN EN 60529标准：防水，粉尘指数符合测试标准。
※ Above specifications can bechanged without prior notice.
※ 由于参数不断更新，如若未通知请谅解。
Accessories& Options
选配件
Impeller
叶轮
Propeller Impeller
螺旋桨式叶轮
Standard grade stainless steel withTeflon shaft produces anaxial flow stir between the bottom and top levels of asample with local shearing force. Used at medium or high speeds for mixingnormal range level viscosity samples.
特氟隆轴的不锈钢叶轮可以在样品的底部和顶部之间形成局部剪切力式的流向搅拌。调至中速或者高速适合一般粘性样品的混匀。
Turbine Impeller
涡轮式叶轮
A radial flowing stir from the top andbottom levels of a sample with a powerful, high shearing turbulent force. Usedideally for the gassing of liquids and mixing medium to high range levelviscosity samples.
可以使样品的顶部和底部形成强大的湍流剪切力式径向流动搅拌。调至高速能使液体析出气体，适合混匀高粘性样品。
Half-Moon &Centrifugal
半月式和离心式叶轮
Tiltable moon-shaped and blade shaftproduces a normal axial flow percentage mixing of samples. Used with roundbottom shaped containers, medium mixing speed, and samples ranging from low tomedium viscosity levels.
可倾斜的月形和叶片形叶轮可以产生的轴向混匀效果。可以运用于底部为圆形的容器，中速适用中低粘性混匀。
Anchor and PaddleImpeller
锚式和桨式叶轮
An anchored shaft that produces a strong tangential flow with a highshearing percentage force on samples with medium to high viscosity level withspeed setting in the low to medium range.
锚式叶轮可以产生强大的切向流动搅拌。中低速适用中高粘性混匀。
PTFE Impeller
PTFE叶轮
Propeller Impeller
螺旋桨式叶轮
Turbine Impeller
涡轮式叶轮
Half-Moon & Centrifugal
半月式和离心式叶轮
Anchor and PaddleImpeller
锚式和桨式叶轮
Cat. No. 货号 | Description 描述 |
AAA37521 | Propeller (50mm 3-Bladed, 8mm Shaft, 400mm Length) 螺旋桨式叶轮(3叶片式直径：50mm, 轴直径：8mm, 轴长度：400mm) |
AAA37522 | Propeller (70mm 3-Bladed, 8mm Shaft, 400mm Length) 螺旋桨式叶轮(3叶片式直径：70mm, 轴直径：8mm, 轴长度：400mm) |
AAA37523 | Propeller (100mm 3-Bladed, 8mm Shaft, 400mm Length) 螺旋桨式叶轮(3叶片式直径：100mm, 轴直径：8mm, 轴长度：400mm) |
AAA37531 | Propeller (50mm 4-Bladed, 8mm Shaft, 400mm Length) 螺旋桨式叶轮(4叶片式直径：50mm, 轴直径：8mm, 轴长度：400mm) |
AAA37532 | Propeller (70mm 4-Bladed, 8mm Shaft, 400mm Length) 螺旋桨式叶轮(4叶片式直径：70mm, 轴直径：8mm, 轴长度：400mm) |
AAA37533 | Propeller (100mm 4-Bladed, 8mm Shaft, 400mm Length) 螺旋桨式叶轮(4叶片式直径：100mm, 轴直径：8mm, 轴长度：400mm) |
AAA37541 | Half-Moon (65/20mm , 8mm Shaft, 300mm Length) 半月式叶轮(叶片直径：65/20mm , 轴直径：8mm, 轴长度：300mm) |
AAA37542 | Half-Moon (90/25mm , 8mm Shaft, 500mm Length) 半月式叶轮(叶片直径：90/25mm , 轴直径：8mm, 轴长度：500mm) |
BEA0570031 | Dissolver (55mm, 8mm Shaft, 350mm Length) 溶解式叶轮(叶片直径：55mm, 轴直径：8mm, 轴长度：350mm) |
BEA0570032 | Dissolver (75mm, 8mm Shaft, 350mm Length) 溶解式叶轮(叶片直径：75mm, 轴直径：8mm, 轴长度：350mm) |
AAA37551 | Centrifugal (50/15mm, 8mm Shaft, 500mm Length) 离心式叶轮(叶片直径：50/15mm, 轴直径8mm, 轴长度：500mm) |
AAA37552 | Centrifugal (80/15mm, 8mm Shaft, 500mm Length) 离心式叶轮(叶片直径：80/15mm, 轴直径8mm, 轴长度：500mm) |
AAA37561 | Turbine (40mm, 8mm Shaft, 500mm Length) 涡轮式叶轮(叶片直径：40mm, 轴直径：8mm, 轴长度：500mm) |
AAA37562 | Turbine (70mm, 8mm Shaft, 500mm Length) 涡轮式叶轮(叶片直径：40mm, 轴直径：8mm, 轴长度：500mm) |
AAA37571 | Anchor (45×45mm, 8mm Shaft, 300mm Length) 锚式叶轮(叶片尺寸：45×45mm, 轴直径：8mm, 轴长度：300mm) |
AAA37572 | Anchor (60×60mm, 8mm Shaft, 500mm Length) 锚式叶轮(叶片尺寸：60×60mm, 轴直径：8mm, 轴长度：500mm) |
AAA37581 | Paddle A (70×70mm, 8mm Shaft, 500mm Length) 桨A式叶轮(叶片尺寸：70×70mm, 轴直径：8mm, 轴长度500mm) |
BEA0570081 | PTFE Propeller (50mm 4-Bladed, 8mm Shaft, 500mm Length) PTFE螺旋桨式叶轮(4叶片式直径：80mm, 轴直径：8mm, 轴长度：500mm) |
BEA0570082 | PTFE Propeller (70mm 4-Bladed, 8mm Shaft, 500mm Length) PTFE螺旋桨式叶轮(4叶片式直径：70mm, 轴直径：8mm, 轴长度：500mm) |
BEA0570091 | PTFE Half-Moon (60 / 18mm , 8mm Shaft, 500mm Length) PTFE半月式叶轮(叶片直径：60/18mm , 轴直径：8mm, 轴长度：500mm) |
BEA0570101 | PTFE Centrifugal (76 / 17mm, 8mm Shaft, 500mm Length) PTFE离心式叶轮(叶片直径：76/17mm, 轴直径8mm, 轴长度：500mm) |
BEA0570111 | PTFE Anchor (80×50×5[j1] mm, 8mm Shaft, 500mm Length) PTFE锚式叶轮(叶片尺寸：80×50mm, 轴直径：8mm, 轴长度：500mm) |
BEA0570121 | PTFE Anchor (80×40mm, 8mm Shaft, 500mm Length) PTFE锚式叶轮(叶片尺寸：80×40mm, 轴直径：8mm, 轴长度：500mm) |
BEA0570131 | PTFE Turbine (70mm, 8mm Shaft, 500mm Length) PTFE涡轮式叶轮(叶片直径：70mm, 轴直径：8mm, 轴长度：500mm) |
BEA0570141 | PTFE Paddle (70mm, 8mm Shaft, 500mm Length) PTFE桨式叶轮(叶片直径：70mm, 轴直径：8mm, 轴长度500mm) |
BEA0570151 | PTFE Paddle A (78×80mm, 8mm Shaft, 500mm Length) PTFE桨A式叶轮(叶片尺寸：78×80mm, 轴直径：8mm, 轴长度500mm) |
Dial Stand
刻度底座
Basic Stａnd 1
基础型底座 1
Basic Stａnd 2
基础型底座 2
Basic Stａnd 3
基础型底座 3
Clamp
夹持器
Clamp Holder(C-20, C-10)
夹持器(C-20, C-10)
Utility Clamp 3Prong
3爪万用夹
Utility Clamp Plat
板型爪万用夹
PTFE Stirring seals
PTFE搅拌密封盖
PTFE Stirringseals
PTFE搅拌密封盖
Prong Clamp, Fixing Clamp, Flexible Coupling
夹持器、固定夹、柔性接头
C3 Prong Clamp
3爪夹
2 Prong Clamp
2爪夹
Fixing Clamp
固定夹
Flexible Coupling
柔性接头
Cat. No. 货号 | Description 描述 |
AAA37501 | Dial Stａnd (W×D×H, 400×400×700) 刻度底座(W×D×H, 400×400×700) |
AAA37502 | Basic Stａnd 1 (W×D×H, 400×400×700) 基础型底座 1 (W×D×H, 400×400×700) |
AAA37503 | Basic Stａnd 2 (W×D×H, 300×400×700) 基础型底座 2 (W×D×H, 300×400×700) |
AAA37504 | Basic Stａnd 3 (W×D×H, 250×350×700) 基础底座 3 (W×D×H, 250×350×700) |
MSS0051 | 15Ø Support Rod, 500mm, M14 Nut 支撑杆直径：15Ø，长度：500mm, 螺母：M14 |
MSS0052 | 18Ø Support Rod, 500mm, M14 Nut 支撑杆直径：18Ø，长度：500mm, 螺母：M14 |
MSS0053 | 20Ø Support Rod, 500mm, M14 Nut 支撑杆直径：20Ø，长度：500mm, 螺母：M14 |
BEA0570161 | PTFE Stirring Seals (24 / 40) PTFE搅拌密封盖(24 / 40) |
BEA0570162 | PTFE Stirring Seals (29 / 42) PTFE搅拌密封盖(29 / 42) |
BEA0570163 | PTFE Stirring Seals (34 / 45) PTFE搅拌密封盖(34 / 45) |
AAA37512 | Clamp Holder, C-10 (Al body, Ø17mm) 夹持器， C-10 (铝质，Ø17mm) |
AAA37511 | Clamp Holder, C-20 (Al body, Ø27mm) 夹持器， C-20 (铝质，Ø27mm) |
BEA1000001 | Utility Clamp 3 Prong 3爪万用夹 |
BEA1000002 | Utility Clamp Plat 板型爪万用夹 |
BEA1000011 | 3 Prong Clamp (80mm grip) 3爪夹（爪长：80mm） |
BEA1000012 | 3 Prong Clamp (60mm grip) 3爪夹（爪长：60mm） |
BEA1000013 | 3 Prong Clamp (20mm grip) 3爪夹（爪长：20mm） |
BEA1000014 | 2 Prong Clamp (60mm grip) 2爪万用夹（爪长：60mm） |
BEA0570181 | Fixing Clamp 固定夹 |
BEA0570191 | Flexible Coupling 柔性接头 |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
塑料机械网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
