注塑机 挤出机 造粒机 吹膜机 吹塑机 吹瓶机 成型机 吸塑机 滚塑机 管材生产线 板材生产线 型材生产线 片材生产线 发泡设备 塑料压延机
张家港市亿春机械制造有限公司
张家港市亿春机械制造有限公司
SMP系列磨粉机SMPseriespulverizer工作原理/Works本机工作部分为刀盘
SMP系列磨粉机
SMP series pulverizer
工作原理/Works
本机工作部分为刀盘。高速粒子在撞击齿板后部分被粉碎，经吸风抽出，而较大粒子则继续撞击、粉碎后被抽出。这样减少了刀盘负荷，提高磨粉效率，又能使粉料得到均匀冷却。
温度低是该机的主要优点。按热功当量：每小时工作后转换为860千卡热量。本机为外抽风，风量达50m3/kw，由进、出口风温差，带走大部分热量。少部分热量由水冷却解决。要求:冷却水的进口温度不大于25℃，出口水温不大于45℃，夏天适当增加冷去口水流以降低温度。
Working part of this machine for cutter, Some high-speed particles are crushed, After impacting dental plate, After the wind out, Large particles continue to impacting, crusher After out, This reduces the load cutter, Improve mill efficiency,
Requirements: cooling water inlet temperature of not more than 25℃, Export water temperature not more than 45℃, Summer due to increase cooling water flow to lower temperature.
Low temperature is the main advantage of machine .By mechanical equivalent of heat: after an hour for power is converted to 860 kcal. The machine is outside the ventilation, the wind reached 50m3/kw, from the import and export air temperature to remove most of the heat. A small part of the heat from the water cooling solution. Requirements: cooling water inlet temperature is not greater than 25℃, exit water temperature is not greater than 45℃, the cooling water flow to increase in summer due to lower the temperature.
主要技术参数/Main technical parameters
刀盘数Number station cutter | 1只 | 外径Outside diameter | 583mm±1mm |
齿板Dental plate | 1付14片 | 优质合金钢High-quality alloy steel | 硬度Hardness 55°-58° |
刀片Cutting tip | 26片 | 优质合金钢High-quality alloy steel | 硬度Hardness 52°-55° |
主电机转速Main motor speed | 2950r/min | ||
主电机功率Main motor power | 45kw | 配用三角带Equipping power | B型，2007mm，8根 |
引风机Draught fan | 型号Model9-19, 4.5# | 配用电动机Spare motor | 5.5kw |
关风机Close fan | 型号Model ZGF | 配用电动机Spare motor | 0.75kw |
产量production | PVC20-40目300-400kg/h | ||
外型尺寸 (L x W x H) Installation dimensions | 整套机器：3400 x 1700 x 4200 Unitized machine：3400 x 1700 x 4200 | 整机重量Complete appliance weight | 1500kg |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
塑料机械网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
