注塑机 挤出机 造粒机 吹膜机 吹塑机 吹瓶机 成型机 吸塑机 滚塑机 管材生产线 板材生产线 型材生产线 片材生产线 发泡设备 塑料压延机
无锡市强氏机械设备厂
无锡市强氏机械设备厂
PS1350型强化双轴撕碎机采用高强度刀片做成齿辊，具备噪音小，污染轻，多运用于金属、塑料、木材、废旧家具玩具撕碎的工作场合
品牌：无锡强氏WUXI QIANGSHI
新旧程度：全新 brａnd new
生产年份：2020年
原产地：中国 CHINA
制造商：无锡市强氏机械设备厂
Manufacturer：WUXI QIANGSHI MACHINERY CO., LTD
功能：SPC塑料板材生产
Function：SPC plastic sheet production--Extrusion sheet
简介：
PS1350主要适用于破碎25mm以下的发泡塑料板材和各种木塑墙板。卧式切屑粉碎机主要由蜗轮蜗杆减速电机、机壳、组合螺旋齿刀盘、主动轴等零件组成。减速电机采用直连蜗轮蜗杆减速电机，直接安装在粉碎机主动轴上，通过齿轮变速传至从动轴，使主从动轴与从动轴上螺旋齿刀盘形成相对运动。主从动轴上的螺旋齿刀盘交错排列，使物料进入后，同时受到挤、撕、剪的作用，使物料得到破碎。
General Information：PS1350 is mainly suitable for breaking foamed plastic panels under 25mm and various wood-plastic wallboards. The horizontal Dual drive shredder is mainly composed of reducer motor, casing, combined spiral tooth cutter, dual driving shaft and other parts. The reduction motor is directly installed on the drive shaft of the shredder, and is transmitted to the driven shaft through gear transmission, so that the main driven shaft and the helical gear cutter on the driven shaft form relative movement. The spiral tooth cutters on the main and driven shafts are staggered, so that after the materials enter, they are simultaneously squeezed, torn, and sheared, so that the materials are broken.
二．Main Components
主要组成部分
2.1主机--参数规格 Specifications
名 称 Name | 规 格 Specs | 数 量 QTY. | 备 注 Others | |
电 机 Motor | 2*30KW | 2 | 西门子 SIEMENS | |
减速机 Reducer Motor | ZSY280 | 2 | ||
刀 具 Tooth Cutter | Ø250*25 | 54 | H13 硬度HDR:53°-55° | |
隔 套 Spacer | Ø178*25 | 54 | 45# | HDR:260° |
主 轴 Main Shaft | Ø150 | 2 | 40cr | HDR:260° |
轴 承 Bearing | -- | 4 | 哈轴 调心 Self-aligning Bearing | |
退料挡板（定刀） Fixed Cutter | -- | 54 | 45# | |
撕碎机箱尺寸 Chassis Dimensions | 450*1350 | |||
三．Equipment Safety Regulations
设备安全规章
3.1前 言 Previous Remarks
手册本章节讲述的是关于设备安全使用的要求。
This section of the manual describes the requirements for the safe use of the equipment.
This manual has repeatedly emphasized requirements regarding equipment installation, operation, and maintenance, as well as other information not included in the safety section.
多数事故的发生都是因为没有遵守简单的安全规程。在机器设有危险标志，请勿违反警示操作。
在设备通电或运转的情况下，不要维修，润滑或清洁设备。
Most accidents occur because simple safety procedures have not been followed. There are danger signs on the machine, please do not violate the warning operation.
Do not repair, lubricate, or clean the equipment while the equipment is energized or running.
3.2安全操作规程 Regulations for safe operation
在你详细了解使用说明书之前不要操作设备。
- 设备在完好的状态下在能够使用，（使用前）要确认电缆是否损坏，控制器，指示灯以及控制部件是否处于完好状态。
- 在启动设备前，要确认是否所有的部件都安装好，安全可靠，有没有其它的物体放在设备上，并确认没有人在设备上工作。
- 没有防护板时不能运行设备。
- 不要移动盖板和限位开关等安全装置
- 任何时候都不要踩踏设备。
- 在设备的运行过程中，听一听是否有异常的噪音，如果有，停机，并找出原因解决问题。
- 时常保持工作区域清洁。
- 暴风雪天气不建议继续工作。
Do not operate the device until you understａnd the instruction manual in detail.
-The device can be used in a good condition. Before use, make sure whether the cable is damaged and whether the controller, indicators and control components are in good condition.
-Before starting the equipment, make sure that all parts are installed, safe and reliable, whether there are other objects on the equipment, and confirm that no one is working on the equipment.
-Do not operate the device without a protective plate.
-Do not move safety devices such as covers and limit switches
-Do not step on the device at any time.
-During the operation of the equipment, listen to whether there is abnormal noise, if there is, stop it, and find out the cause and solve the problem.
-Always keep the work area clean.
-Snowstorm is not recommended to continue working.
3.3维修安全规程 Maintenance safety regulations
任何的维修工作必须有资格的人员根据设备制造商所提供的说明书进行。在熟悉维修说明书之前不要进行任何的维修工作。
- 在开始任何维修工作之前，都要拔掉电源插头。
- 即使在设备停止而电源插头没有拔出之前，不要清扫设备或外围设备。
- 在更换电器部件时，首先要将电源插头拔出。只能使用和以前型号一样的部件替换报废部件。
- 不要将防护板限位开关等安全装置移开，如果在维修过程不可避免要将安全设置暂停或移开，那么设备仅能由特殊的人使用，且此人必须要保证避免造成人身伤害和设备损坏。
- 在安全装置维修复位之前，不要使用设备。
- 时刻保持维修区域清洁。
- 更换部件和其它东西时，要提前与原来的型号进行对比，并要符合标准。
- 只能使用的润滑油和油脂或相同的。
在维修过程中，不要将工具或其它物体放在设备上。
Any repair work must be performed by qualified personnel in accordance with the instructions provided by the equipment manufacturer. Do not perform any repair work until you are familiar with the repair instructions.
-Unplug the power plug before starting any maintenance work.
-Do not clean the device or peripherals even if the device is completely stopped and the power plug is not unplugged.
-When replacing electrical parts, first unplug the power plug. Replace scrap parts with exactly the same parts as previous models.
-Do not remove the safety devices such as the limit switch of the protective plate. If the safety setting is unavoidably suspended or removed during the repair process, the device can only be used by a specially authorized person, and this person must ensure that personal injury is avoided And equipment damage.
-Do not use the device until the safety device has been repaired and reset.
-Keep the maintenance area clean at all times.
-When replacing parts and other items, compare them with the original model in advance and meet the standards.
-Use only specified lubricants and greases or the same.
Do not place tools or other objects on the equipment during the repair process.
双轴撕碎机图片：
撕碎机工作
塑料机械网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
