注塑机 挤出机 造粒机 吹膜机 吹塑机 吹瓶机 成型机 吸塑机 滚塑机 管材生产线 板材生产线 型材生产线 片材生产线 发泡设备 塑料压延机
四川川大干燥科技工程有限责任公司
四川川大干燥科技工程有限责任公司
暂无信息 |
方形筛一、工作原理及应用范围介绍IntroductionofWorkingPrincipleandScopeofApplication本机上部采用快拆式手柄，把整机连成一个整体，上盖采用全密封、有效防止物料在过筛时由于振动而产生粉尘飞扬
方形筛
一、工作原理及应用范围介绍 Introduction of Working Principle and Scope of Application
本机上部采用快拆式手柄，把整机连成一个整体，上盖采用全密封、有效防止物料在过筛时由于振动而产生粉尘飞扬。筛体下部安装振动电机，有效保证了物料的结构紧溱，下部采用弹簧减振，使整机在平稳状态下工作，下面底部采用可调试，可微调筛面倾斜角度，根据物料特性以取得理想的过筛效果。该机广泛应用于制药、食品、鸡精、化工、饲料、兽药、矿产、粮食等行业的连续大批量生产运行。
The fast disassembly-type handle is provided at the upper part of the equipment to integrate the whole machine; the cover is fully sealed to effectively prevent the flying dust due to vibration during the material screening. The vibration motor is installed at the lower part of the screen to effectively ensure the compact structure of materials; the spring vibration attenuation is adopted at the lower part to ensure the whole machine operating at stable status, and adjustable incline angle of screen at the lower part may be adjusted according to the material property to obtain the best screening effect. This equipment is widely applied in thepharmacy, food, chicken essence, chemical, feed, veterinary drug, mineral, and grain industries for continuously large-batch production and operation.
二、特点Characteristics
1. 该机具有结构简单、操作方便、体积小。
2. 处理量大、噪音低、低故障、寿命长。
3. 生产率高、振幅可调、耗能低。
4. 拆装方便、清洗、无粉尘等优点。
1. The equipment is simple in structure, convenient for operation and small in volume.
2. It has large treatment volume, low noise, little failure, and long service life.
3. It has high productivity, adjustable amplitude and low energy consumption.
4. It is convenient for dismounting without dead angle for cleaning and dust.
三、技术参数（下表中数值仅供选型时参考）
Technical parameters (the values in the table below are for reference in type selection only)
四、外形简图Dimension sketch
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
塑料机械网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
