注塑机 挤出机 造粒机 吹膜机 吹塑机 吹瓶机 成型机 吸塑机 滚塑机 管材生产线 板材生产线 型材生产线 片材生产线 发泡设备 塑料压延机
四川川大干燥科技工程有限责任公司
四川川大干燥科技工程有限责任公司
暂无信息 |
一、工作原理及应用范围介绍IntroductionofWorkingPrincipleandScopeofApplication二维混料机主要由转筒、摆动架、机架三大部分构成
一、工作原理及应用范围介绍Introduction of Working Principle and Scope of Application
二维混料机主要由转筒、摆动架、机架三大部分构成。转筒装在摆动架上，由四个滚轮支撑并由两个传动轮对其进行轴向定位。在四个支撑滚轮中，其中两个传动轮由转动动力系统拖动使转筒产生转动；摆动架由一组曲柄摆杆机构来驱动让转筒作上下运动，曲柄摆杆机构装在机架上，摆动架由轴承组件支撑机架上。
广泛运用于：制药厂的总混机，食品、化工、饲料、粉末冶金等行业大批量混料。
2D mixer is mainly composed of a drum, a swing frame and a rack. The drum is installed on the swing frame, supported by four rollers, and positioned by two driving wheels on the axle direction. Among four supporting rollers, two of them are dragged by rotating power system; the swing frame is drove by one group of crank rocker mechanism to make the drum moving up and down; the crank rocker mechanism is installed on the rack, and swing frame is supported by the bearing assembly on the rack.
It is widely applied in the mixing assembly of pharmaceutical factory, and large batch mixing of food, chemical, feed, and powder metallurgy industries.
二、特点 Characteristics
1.设备结构简单，占地占空间小，自动出料且出料干净。
2.容器内可据工艺需要加设抄板，用以强化混料效果。
3.运行平稳，清洁方便。
4.根据工艺需要，可满足大批量的总混。
1.The equipment is simple in structure, small in floor area, automatic and clean in discharge.
2.The shoveling plate may be set in the container as per the process requirement to strength the mixing efficiency.
3.It is stable in operation and convenient for clean.
4.It can meet the total mixing of large batches as required by the process.
三、外形简图Dimension sketch
四、技术参数（下表中数值仅供选型时参考）
Technical parameters (the values in the table below are for reference in type selection only)
二维混合机
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
塑料机械网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
