产品应用
应用行业：机械手可用于注塑行业、挤出行业、医疗行业(科研塑料甚至金属产品)、食品行业(各种快餐盒)、光学行业(塑料光学制品)、电子行业(电子产品的塑料外壳)、汽车行业(汽车保险杠)、激光行业等
应用工艺：产品成型前段的镶件埋入及成型完成后的取放、摆盘、装箱。
应用效果：应用于外观及精度要求较高的成品及水口取出，或模内镶嵌、模内剪切、模内贴标、码垛等复杂应用。
三轴系列 适用于50T-1000T
三轴系列机械手臂用于50-1000吨的各型塑胶卧式射出成型机,3轴AC伺服驱动,
上下手臂结构分：单、双截式,三轴系列机械手臂适用于高精度，
高速度的取出与埋入，响应速度快，定位精度高，应用于快速取出或多样的取出与埋入应用。
二轴/三轴伺服横走式机械手
特点The characteristics of：
适用于100-1000T的各型卧式射出成型机的成品及水口取出。 取出速度快、定位精准、调治具方便快速。安装机械手后产能提升10-30%、降低产品的不良率、保障操作人员的安全性、减少人工、精准的控制生产量、减少浪费。 各轴驱动使用高性能的AC伺服马达驱动，具备超高速的取出时间0.48秒、全循环时间在4.8秒以内，，高定位精度重现性达±0.15mm。 程序可自由教导性编辑，可依据动作需求弹性的设定动作，具备高性能的取出特性。 煜豹三轴机械手B系列有YBB600~B1200机型，手臂型式有：单/双节型，上下行程在600~1200mm。 高刚性3D结构设计，结构稳定震动小耐久寿命长。 采用高精度直线滑轨，耐磨损、耐热、寿命长不变形。 手臂结构采用高刚性铝挤型梁，质量轻、高刚性，配合皮带倍速机构保证取出时间。 可选择增加副臂用于三板模的应用，
It is suitable for taking out the finished product and nozzle of 100-1000t horizontal injection molding machine. The arm type is divided into single section type and double section type. The horizontal arm and the front arm are driven by AC servomotor, with fast removal speed, accurate positioning, convenient and fast adjustment. The installation of manipulator can increase production capacity (10-30%), reduce the defective rate of products, ensure the safety of operators, reduce manual, accurate control of production, reduce waste. Each shaft is driven by high performance AC servo motor, with ultra-high speed extraction time of 0.48 seconds, full cycle time of less than 4.8 seconds, high positioning accuracy reproducibility of ±0.15mm, the program is teachable, can be set according to the action demａnd elasticity, with high performance extraction characteristics. It can be used in all kinds of products with short molding cycle, or in more complex automatic applications. Yu leopard B series of three rod manipulator have YBB600 / B700 / B800 B900 / B1000 / B1200 / models, arm type has a single cutting and double cutting, and can increase pair of arm used in three board application, up and down stroke in 600 ~ 1200 mm. Ultra-fast extraction greatly improves production efficiency. High rigidity 3D structure design, structure stability vibration small durability long life. Using high precision high-speed special straight line slide rail, wear resistance, heat resistance, long life without deformation. The arm structure adopts high-rigid aluminum extrusion beam, which is light in weight and high in rigidity. T tooth type steel wire PU belt transmission, good stability, accurate reproducibility of positioning up to ±0.15mm.
|
拓展功能：
正臂预留了两組吸管路/一组夹管路/一组放管路及检测讯号,可应付各种成品多样化的取出。 可匹配自动气动剪刀,把产品水口自动剪掉,让机械手功能发挥到极限,让机械手更智能 备用输出点可以连接其他自动化设备，如：剪水口/输送带/承接台等。
Reserved two groups of pressure pipeline and detecting signals, can be used as clamp holding fixture out applications such as absorption, can deal with all kinds of product diversification. Can be perfect match automatic pneumatic scissors, cut off the product nozzle automatic, ，let manipulator function to the limit, make more intelligent manipulator Spare output point can be connected to other automation equipment, such as conveyor belt and to undertake, etc.
|
