注塑机 挤出机 造粒机 吹膜机 吹塑机 吹瓶机 成型机 吸塑机 滚塑机 管材生产线 板材生产线 型材生产线 片材生产线 发泡设备 塑料压延机
北京时代超群电子商务有限公司
北京时代超群电子商务有限公司
五轴伺服机械手 BRTR07WDS5PC
五轴伺服机械手
Five-axis servo manipulator
产品特点 Product Features
BRTR07WDS5PC系列适用于50T-200T的各种卧式射出成型机的成品 及水口取出，手臂形式双截式，为双臂，五轴AC伺服驱动，可以应用 于快速取出或模内贴，模内镣件等特殊产品应用，定位精准，速度 快，寿命长，故障低，整机高度低，各类高低厂房都可安装，可増加 产能(10-30%)降低产品的不良率，保障操作人员的安全性，减少 人工，精准控制生产量，减少浪费，保证交期。
五轴驱控一体控制系统：信号线少，远距离通讯，扩展性能好，抗干 扰能力强，重复定位精度高，可以同时控制多轴，设备维护简单，故 障率少。
BRTR07WDS5PC is applicable to all types of horizontal injection machine ranges of 50T-200T for take-out products and runner. Vertical arm is telescopic stage with product arm and runner arm. Full AC servo motor driven on each axis and applicable to take-out products with short forming cycle or complex automatic. Also suitable for in mold labeling and in mold inserting application.
Five-axis driver and controller integrated system:Less connecting line, long distance communication, good expansion performance, strong anti-interference ability, high repeat precision, can simultaneously control multiple axis,simple equipment maintenance, low failure rate.
主要规格 Main Specification
机型哀示：W：双蔵式D:双胃机械手(l«品曾+料头常)S5：五JfiAC伺服马达驱动(1«品上下、引拔+横行)
Denote: W:Telescopic type. D:Product arm + runner arm. S5:Fh/e-axis driven by AC Servo Motor.
上述取物时间，循环时间为我司内部测试标准溜试堵果，在机器实际应用过程中会因实际使用行程，负载，调试参数不同而有所变化。
The above-mentioned cycle time are the results of our internal test standard. In the actual application process of the machine, they will vary according to the actual operation, loading and debugging parameters.
因改良等原因，规格及外观有所变更时，不再另行通知，敬请谅解'
Without further notice if specification and exterior have been changed because of improvement.Thanks for your understanding.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
塑料机械网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
