当前位置：上海厚凯机电设备有限公司>>ATLANTA德国亚特兰大>>ATLANTA德国亚特兰大PE Series

ATLANTA德国亚特兰大PE Series

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号

品牌

厂商性质其他

所在地上海市

在线询价收藏产品查看联系电话

塑料机械网采购部电话：0571-88918531QQ:2568841715

联系方式：查看联系方式

更新时间：2024-12-21 06:48:06浏览次数：62次

联系我时，请告知来自塑料机械网

产品分类 品牌分类

  ATLANTA德国亚特兰大

暂无信息

上海厚凯机电设备有限公司

经营模式：其他

商铺产品：279条

所在地区：上海上海市

询价 给他留言

产品简介

Cost-effective alternative to the P series with an energy-efficient Lean motor. Precise. Compact. Light. Rugged. Use in automation and robotics. Helical gearing. Rugged solid shaft.

详细介绍

Shaft Designs

- Solid shaft with key
- Solid shaft without key
Mounting Positions

- Any mounting position.
Lubricants and Maintenance

- Synthetic high performance gear grease
- Lubricated for life
- Maintenance-free
"Bridge the Gap"

Based on this principle, STOBER has brought a new motor class to market:
- Up to 96% efficiency and thus IE5
- Higher acceleration capability than asynchronous motors
- Substantially lighter and more compact than asynchronous motors with a comparable rating
- Rugged thanks to absence of the encoder
- Regulation of speed and torque at low speeds and when stalling
- Only a standard power cable is required without any additional cores or shielding
- Rotating plug connector with quick lock
- Spring-loaded holding brake (optional)

Your Bridge to Greater Efficiency

With up to 96 percent efficiency, the STOBER lean motor corresponds to the IE5 efficiency class. Asynchronous motors usually only achieve similar efficiency by using more or higher quality materials, like copper. These motors end up being significantly larger and heavier as a result. The future-proof Lean motors allow engineers to design smaller drives, dimension the machine itself smaller and reduce the installation area. Users save energy and reduce the costs for the components. Compared to an asynchronous motor with incremental encoder, the Lean motor can regulate more dynamically and efficiently thanks to its greatly reduced flywheel mass.

STOBER has it under control: Lean in the system

The STOBER Lean motor allows for variable regulation of speed and torque from a standstill to maximum speed with full torque control. Despite not having an encoder in the motor, the speed deviation is less than 1%, while the positioning accuracy is ±1°. The position and speed are determined in combination with the STOBER SC6 and SI6 drive controllers. The controllers have a very compact design, so users can reduce costs in procurement, commissioning and maintenance—ａnd have more design flexibility at the same time.
- SI6 with power range from 0.75 to 25.9 kW
- SC6 with power range from 0.75 to 11 kW
For more information, see Drive Controllers
Less is more: A standard power cable is all you need!

The position of the encoderless motor is determined using the power connection terminals. This means that a STOBER standard power cable can be used without any additional cores or shielding. This reduces installation effort considerably.

A Robust and Less Expensive Alternative

The Lean motor provides an alternative to versatile synchronous servo motors that is approximately 30% more cost-efficient. It is also much more rugged since no electronics are installed in the motor. As a result, the Lean motor is well-suited to automation tasks that are exposed to high vibrations and oscillations.
Optional

The Lean motor is available in combination with many STOBER gear units.
You have the option of receiving the motors with a rugged spring-loaded holding brake, which provides high braking performance throughout the entire service life.
Winding Protection

PTC thermistors are installed in STOBER synchronous servo motors as a configuration feature to implement thermal winding protection. This makes it possible for the motor to exceed the maximum permitted winding temperature with the appropriate devices turned off.
Paint Finish

Black RAL 9005

Type	Ratio	Max. perm. acceleration torque [Nm]	Stall torque on the gear unit output [Nm]	Max. perm. input speed in cyclic operation [1/min]	Backlash [arcmin]	Torsional stiffness [Nm/arcmin]
PE311	3 – 7	13 – 40	7.1 – 22	6000	8	3.6 – 4.2
PE312	12 – 16	51 – 55	28 – 37	6000	10	4.2
PE411	3 – 10	28 – 99	13 – 49	5500 – 6000	8	10 – 14
PE412	12 – 16	111 – 120	51 – 71	5500 – 6000	10	14
PE511	3 – 10	59 – 250	29 – 145	4500 – 5000	8	27 – 35
PE512	12 – 20	232 – 310	115 – 191	4500 – 5000	10	33 – 35