| 型号 | Model | Units | HR-2500 | ||
| 射出部分 | 螺杆直径 | Screw Diameter | mm | ∮60 | ∮65 |
| 射出压力 | Injection Pressure | Kg/cm | 1588 | 1353 | |
| 理论射出容量 | Theoretical Shot Volume | cm | 706 | 829 | |
| 射出量(P,S) | Max.Shor Weight | g/oz | 630/22.2 | 740/26 | |
| 射出率 | Injection Rate | cm/sec | 189 | 221 | |
| 锁模系统 | 合模力 | Clamping Force | T | 250 | |
| 开模力 | Opening Force | T | 20 | ||
| 模柱间距 | DiHRance Between Tie Bars | mm | 760x710 | ||
| 最小模厚 | Min Mold Height | mm | 350 | ||
| 开模行程 | Opening HRroke | mm | 400 | ||
| 开模距 | Max.Open Daylight | mm | 750 | ||
| 顶出力量 | Ejector Force | T | 6.5 | ||
| 顶出高度 | Ejector HRroke | mm | 100 | ||
| 液压电力系统 | 液压 | Max.Hydraulic Pressure | Kg/cm | 140 | |
| 动作油量 | Pump Output | l | 550 | ||
| 油泵电机 | Pump Motor Power | Kw | 30 | ||
| 电热容量 | Barrel Heating Power | Kw | 16.8 | ||
| 总用电量 | Total Wattage | Kw | 46.8 | ||
| 其他 | 机器重量 | Machine Weight | T | 11.1 | |
| 机器尺寸 | Size(LxWxH) | m | 2.8x1.6x5.3 | ||
