PVC管件专用注塑机

特点介绍：

1、威胜系列是公司根据全电动注塑机的产品需求特点，专门研发的一款肘杆式全电动注塑机，开合模、顶出、储料、注射四部分均为

     伺服电机驱动，实现制品成型的高精度与高稳定性。
     Weisheng series is a toggle-type all-electric injection molding machine specially developed by the company according to

     theproduct demａnd characteristics of all-electric injection molding machines.The four parts of mold opening and closing.ejection.

     materialstorage and injection are all driven by servo motors,thus realizing high precision and stability of product molding.
2、模版，肘杆等锁模部件均采用高倍数设计，既提升开合模部分的钢性与精度，同时又实现对模具更好的安全保护。具有更灵敏的低压

     模保功能。
     Mould-locking parts,such as templates and toggle bars. are designed with high magnification,which not only improves

     therigidity and precision of the mould opening and closing part.but also realizes better safety protection for the mould,

     and has moresensitive low-voltage mould protection function.
3．移动模板支撑采用线性导轨，与石墨铜套加润滑脂润滑，保证模具区清洁，特别适合医疗产品与高精度光电产品。

     The movable template support adopts linear guide rail,which is lubricated with graphite copper sleeve and grease to

     ensure   thecleanliness of the mold area,especially suitable for medical products and high-precision photoelectric products.
4．优化注射运动部件设计，使注射速度提升，动态响应快，注射速度响应均小于40ms．满足客户对超薄及超精密产品的高要求成型。       

     Optimize the design of the injection moving parts,so that the injection speed is improved.the dynamic response is fast,

     and theresponse of the injection speed is all less than 40ms,meeting the high requirements of customers for uttra-thin

     and ultra-  precision products.
5．控制系统对注射速度与压力均实现闭环控制，满足高标准成型工艺要求，生产过程稳定可靠，注射及保压压力精度可达0.1mpa。

     The system realizes closed-bop control of injection speed and pressure,which meets the requirements of

     high-standardmolding    process.The production process is stable and reliable, and the precision of injection and holding

     pressure canreach 0.1mpa.
6、储料与开合模同步，开模和顶出同步，大大缩短产品成型周期。
     Material storage is synchrorized with mold opening and closing,ａnd mold opening and ejection are synchronized,which

     greatlyshortens the product molding cycle.
7、注射丝杆及压力传感器均采用日本品牌产品，确保机器运行精度及寿命，并且采用350mm／s与200mm／s的高射速来满足高要求的成型产品。
    The injection screw and pressure sensor are made of Japanese brａnd products to ensure the running accuracy and service

     lifeof the machine.ａnd the high firing rate of 350 mm/s and 200 mm/s is adopted to meet the requirements of high speed.

     Thereguired molried products.