| Cycle speed maximum (with good CN mold) 设备运转速度(在使用国内品质好的模具的情况下) | Forming adn cutting production cycle of up to 30 cycles/min. Single forming production cycle of up to 35 cycles/min. 成型冲切可以达到30周期每分钟,单成型可达35周期每分钟 |
| Dry cycle speed 空机运行周期 | 45 cycles/min 45周期每分钟 |
| Pet material thickness Pet材质厚度 | 1.5-1.8/8~10 modules per minute 1.5-1.8/每分钟8~10模次 |
| PP material thickness PP材质厚度 | 2.0/6~8 modules per minute 2.0/每分钟6~8模次 |
| Forming area maximum 成型面积 | 845x645mm |
| Forming area minimum 最小成型面积 | 400x300mm |
| Closing force (Forming station) 闭合力(成型站) | 400KN |
| Height of formed part above or below film level 成型产品高度，正向/负向 | 125mm/110mm |
| Forming station Top / Bottom table movement 成型站上/下工作台移动 | 205mm |
| Film thickness range (depending on film properties) 膜料 厚度范围（取决于膜料特性） | 0.2-2mm |
| Film width maximum (parallel rails) 膜料宽度（平行链轨） | 900mm |
| Operation pressure 操作压力 | 6bar |
| Cutting station force 裁切站闭合力 | 750KN |
国内24小时内完成应急处理
定期进行客户回访及机械维护
