德国OME产VP9101 进样泵注射泵，注射器参数
| 电压要求: | 供应电压: | 24VDC ± 5V | |
| 电流: | Max.1A | ||
| zui大负荷: | 3000 steps | ||
| 活塞驱动: | 原理: | Quad encoder for loss of steps, detection of loss steps with error message | |
| l额定行程: | 30mm | ||
| 活塞速度: | 1.2 sec. - 20 min./full stroke (speed ranges vary depending on syringe size and tubing) | ||
| 进样管: | 类型： | XP: 50µl, 100µl, 250µl, 500µl, 1.0ml, 2.5ml, 5.0ml | |
| 精度: | 0.05% CV within run at full stroke (for 1000µl syringe and above) | ||
| 错误率: | <1.0% at full stroke | ||
| 流动接触: | Glass, PCTFE and Teflon | ||
| 阀/阀驱动: | 阀的选项: | 120° 3-port distribution | |
| 运行时间: | 250ms between adjacent ports | ||
| 驱动: | Stepper motor with optical sensor for position detection | ||
| Positions: | Input, output, bypass | ||
| 材料: | Plug: virgin teflon Body: PCTFE | ||
| 适合接口: | 1/4-28"-UNF screw fitting for syringe | ||
| 阀连接 | |||
| 螺丝纹接头 | |||
| 螺纹 | 管径 | 货号 | |
| M6 | 3.2mm(1/18") | 4130005 | |
| 1/4x28" | 3.2mm(1/18") | 4130020 | |
| M6 | 1.6mm(1/16") | 4130016 | |
| 1/4x28" | 1.6mm(1/16") | 4130019 | |
| M6 | 2.7mm | 4130004 | |
| 1/4x28" | 2.7mm | 4130025 | |
| Female luer Caps,10 per Pack | 2702206 | ||
| 螺丝纹接头垫片 | |||
| 为管径 | 为货号 | ||
| 3.2mm | 4132032 | ||
| 1.6mm | 4132016 | ||
| 2.7mm | 4132031 | ||
| 通讯接口: | 类型: | RS 232, RS 485 or CAN bus | |
| 通讯速率: | 9.600 or 38.400, 100K or 125K (CAN bus) | ||
| 格式: | Data bits: 8 parity: none Stop bits: 1 half duplex | ||
| 地址拨码: | up to 15 XP/AL devices can be addressed individually | ||
| 信息: | Data terminal and OEM protocol | ||
| Firmware: | Programmable ramps, cutoffs, backlash compensation, plunger speeds, delays and loops Arbitrarily selectable plunger speed Clearance compensation Absolute and relative positions Diagnostics Flash-PROM | ||
| 环境温度: | 温度: 17-37°C 湿度: 10-85% Non condensing RH at: 5°C-40°C | ||
| 尺寸: | 高度: | 127mm (+)1mm | |
| 宽度: | 45mm (+)1mm | ||
| 深度: | 113mm | ||
| 重量: | 1.2kg | ||
