系列特点
可实现英式插头一模四穴的生产，PVC料专用螺杆料管设计，机器高效且稳定。
技术参数
| CH系列参数表/SPECIFICATION | |||||||||
| 项目/DESCRIPTION | 单位/UNIT | CH-550 | CH-650 | CH-750 | |||||
| 射出系统 | 螺杆直径 | SCREW DIAMETER | mm | φ36 | φ42 | φ44 | φ48 | φ48 | φ52 |
| 射出压力 | INJECTION PRESSURE | kg/cm2 | 1620 | 1190 | 1388 | 1166 | 1333 | 1136 | |
| 理论射出容积 | THEORETICAL INJECTION VOLUME | cm3 | 142 | 194 | 243 | 289 | 289 | 339 | |
| 射出重量（PS） | INJECTION CAPACITY (PS) | g | 134 | 183 | 230 | 273 | 273 | 320 | |
| oz | 4.7 | 6.5 | 8.1 | 9.6 | 9.6 | 11.3 | |||
| 射出重量（PVC） | INJECTION CAPACITY (PVC) | g | 176 | 241 | 302 | 359 | 359 | 421 | |
| oz | 6.2 | 8.5 | 10.6 | 12.6 | 12.6 | 14.9 | |||
| 射出率 | INJECTION RATE | cm3/sec | 86 | 118 | 129 | 154 | 181 | 212 | |
| 锁模系统 | 锁模力 | CLAMPING FORCE | ton | 50 | 60 | 70 | |||
| 模板尺寸 | UPPER PLATEN SIZE | mm | 550×300 | 650×300 | 750×300 | ||||
| 最小模厚 | MINIMUM MOLD THICKNESS | mm | 200 | 200 | 200 | ||||
| 开模行程 | OPENING STROKE | mm | 250 | 250 | 250 | ||||
| **开模距 | OPENING DAYLIGHT | mm | 450 | 450 | 450 | ||||
| 料嘴中心高 | NOZZLE CENTER HEIGHT | mm | 150±50 | 150±50 | 150±50 | ||||
| 料嘴中心距 | NOZZLE CENTER DISTANCE | mm | 75 | 75 | 75 | ||||
| 顶出力 | EJECTOR FORCE | ton | 2.7 | 2.7 | 2.7 | ||||
| 顶出高度 | EJECTOR STROKE | mm | 90 | 90 | 90 | ||||
| 其他 | 系统**压力 | HYDAULIC SYSTEM PRESSURE | kg/cm2 | 140 | 140 | 140 | |||
| 伺服泵浦流量 | MAXIMUM PUMP FLOW | L/min | 60 | 80 | 100 | ||||
| 油箱容积 | OIL TANK VOLUME | L | 180 | 180 | 180 | ||||
| 冷却水用量 | COOLING WATER CAPACITY | L/min | 60 | 60 | 60 | ||||
| 电热容量 | HEATER CAPACITY | kW | 5.8 | 7.2 | 7.2 | ||||
| 机器尺寸 | MACHINE SIZE (L×W×Hmin) | m | 2.5×1.1×2.2 | 2.5×1.1×2.2 | 2.5×1.1×2.2 | ||||
| 机器重量 | MACHINE WEIGHT (APPROX.) | t | 2.5 | 2.8 | 3.0 | ||||
