| Length | x | Width | x | Height | Weight approx. |
| 1600mm | x | 820mm | x | 1450 mm | 425 kg |
压缩机主要功能：
1. 七寸彩色触摸式显示屏，西门子PLC控制系统，德国威卡压力传感器
2. 带入口压力监控、油压监控、级间压力监控、系统压力监控
3. 带ACD自动排污系统
4. 自动启停机功能，入口进气压力低报警
5. 安装隔音外壳
6. 带维修保养周期提醒
Technical Data for Compressor Block:
压缩机主机技术参数：
| Medium : 压缩介质 | 空气/氮气 |
| Intake Temperature : 进气温度 | +5 to +45°C |
| Ambient Temperature : 环境温度 | +5 to +45°C |
| Nominal Pressure Max. : 安全阀压力 | 330bar |
| Working Pressure : 工作压力 | 300 bar |
| Capacity : 流量 | 250 l/min |
| Number of Compression stages : 压缩级数 | 3 |
| Number of Cylinders : 汽缸数 | 3 |
| Stroke : 活塞冲程 | 40 mm |
| Drive : 驱动方式 | 皮带 |
Technical Data for Prime Mover:
驱动电机的技术参数：
| Type : 型号 | three phase electric motor |
| Power : 功率 | 5.5 kW |
| Speed : 转速 | 2840 1/min |
| Voltage : 电压 | 380 v |
| Frequency : 频率 | 50 Hz |
Standard Scope of Supply:
供货范围
COMPRESSORBLOCK
压缩机主机
Oil pump for force feed lubrication with oil filter
油泵带油滤器作注油式润滑
Oil sump content: 2,8l
主机的油池容量：2.8升
Interstage coolers, air cooled after each stage
每级压缩后都设有冷却器 (风冷)
Aftercooler, air cooled, outlet temp. approx. 10-15 °C above ambient temp.
压缩气体经过冷却器后的温度大约高于环境温度10-15 °C
Intermediate oil/water separators after each stage (exept 1st stage)
每级压缩后都设有中级水油分离器 (除级外)
Final oil/water separator
终级水油分离器
Safety valves after each stage
每级压缩后都设有安全阀
Final pressure safety valve
终级安全阀
Pressure maintaining and check valve before compressor outlet
压缩机出口前设有压力维持阀及单向阀
Crankcase venting back to suction side
曲轴箱排放到冷凝水收集器
Final pressure gauge
终级压力表
First oil filling
压缩机已加注润滑油
BAUER 德国原装高压重载主机
油泵强制润滑，满足7天*24小时重载运行
AUTOMATIC CONDENSATE DRAIN DEVICE
冷凝水自动排放器
Drains all oil/water separators during compressor operation
在压缩机运作过程中会排放所有水油分离器的冷凝水
Draining interval is adjustable
可调整每次排放间隔时间
Unloaded start integrated (automatic drain during shut-down of the unit)
不负载起动 (冷凝水会自动排放当压缩机关掉时)
Condensate collecting tank 10l with silencer and filter for exhaust gas
排气设有消音器及过滤器的10升收集箱
CONFIGURATION AND STYLE OF UNIT
压缩机构造及款式
Horizontal arrangement of the unit on solid crash frame
压缩机水平安装在稳固底架上
Shock absorbers for free standing installation
设有减震器的独立式设置
Instrument panel and monitoring elements integrated in compressor frame
仪表板及监控原件装在压缩机架上
High pressure outlet: ：fitting 8S for pipe ? 8mm
高压出口: 8mm卡套接头（适合8毫米外径钢管）
COMPRESSOR CONTROL
压气机自动控制箱
For automatic shut down at final pressure
全自动化启停机根据终端压力
