WHMD-500模具除露机,模具除湿机

模具除露机,模具除湿机采用*的新型蜂巢转轮和环保节能设计，克服了传统蜂巢成型难，成本高，易磨损，劣化快的缺点；
模具除露机,模具除湿机出风口加装冷却器，确保较低的干燥出风温度，提升除露效果；
延长模具的使用寿命，降低腐蚀，减少产品瑕疵及废品率的比率；
采用PID温度控制系统，具有再生温度设定与实际温度显示功能；
 具有超温、电源逆相、马达过载等保护功能。

▲ Honeycomb rotor is used to ensure constant air dehumidification effect
▲ Outlet equipped with cooler, the outlet air temperature, dry to ensure low increase in addition to the effect
▲ Inhibits corrosion and prolongs service life of the mould, and yet reduces moulding cycle time
▲ Supplied as standard,a return air collector is used to collect return air from the moulding area back to this machine and to form a closed-loop air circulation, which is particularly practical in tropical climate
▲ Accurate control and display of regenerating temperature using PID Control
▲ Have over-temperature, and the power phase sequence errors, such as motor overload protection function

产品简介

WHMD系列模具除湿机主要应用在塑料成型中，由于模具使用冷冻水来缩短成型周期而产生的结露问题，特别是PET瓶胚射出zui为适用。本机采用蜂巢转轮系统进行除湿作业，确保模具周围始终维持0～10℃的低露点空气环境，不让模具产生结露现象也不受季节变化的影响，大幅降低不良率。

The WHMD series mould sweat dehumidifiers are designed for the inhibition of moisture sweat from condensing on the mould surface Forming of moisture sweat on the mould surface is due to the use of chilled water for reducing the moulding cycle time, particularly while moulding of the PET preforms To bring about the moisture sweat on the mould surface is because the mould surface temperature is lower than the dew point temperature of surrounding air, the water vapor comes into being, then causes corrosion of mould and effects quality of moulding parts as well as production efficiencies. This series of machine uses honeycomb rotor to carry out dehumidification function，which generates a dry airflow with dew point ranging from 0～10℃ and ensures the surrounding air of mould remaining in a low dew point temperature It provides constant low dew point surrounding air to the mould surface all year round without being influenced by the change of seasons.