津鸿工程塑料合金平移滑板 返回列表页

工程塑料合金平移滑板MGE顶推滑板的性能
1、MGE 板具有良好的弹性和抗冲击性，能够较好地消除轨道不平造成的局部高压带来的各种危害；
2、MGE 板摩擦系数低、动静摩擦系数相差小，不会出现爬行现象，运行平稳：
3、MGE 板自润滑免维护，即使在干摩擦条件下也可正常使用：
4、MGE板承载能力大、抗震性能好，既能承受较大的沖击载荷，也能承受冲击载荷，在受到大的负荷时，具有很好的柔韧性和自恢复性；
5、MGE 板耐磨损、耐腐蚀，比磨损率为 107mg/N-m,较其它非金属材料提高了一个数量级，使用寿命大大提高。在电场、化学场、力场及酸、碱、盐介质条件下
不腐蚀、不溶胀；
6、 MGE 板不剥落、抗剪能力强：
7、MGE 板吸水率极低、尺寸稳定性好。

MGE顶推滑板的主要优点
1、耐磨性，较低的磨损率

2、自润滑性能好，縻擦系数小
3、抗冲击强度高，韧性好。
4、抗化学腐蚀性优异，可耐（除浓硫酸，浓硝酸，少数有机溶剂以外）几乎所有的酸，碱，盐介质。
5、无毒，无味，无渗透出物。
6、具有弹性，吸振性，自恢复好，吸水率极低。
7、优良的耐低温性能，即便在-176 摄氏度时也不脆裂

Performance of MGE Top Push Sliding Plate Engineering Plastic Alloy Plate

1. MGE board has good elasticity and impact resistance, which can effectively eliminate various hazards caused by local high voltage caused by uneven tracks;

2. MGE board has low friction coefficient, small difference in dynamic and static friction coefficients, no crawling phenomenon, and smooth operation:

3. MGE board is self-lubricating and maintenance free, and can be used normally even under dry friction conditions:

4. MGE board has a large load-bearing capacity and good seismic performance, which can withstand both large impact loads and impact loads. When subjected to large loads, it has good flexibility and self recovery;

5. MGE board is wear-resistant and corrosion-resistant, with a specific wear rate of 107mg/N-m, which is an order of magnitude longer than other non-metallic materials and greatly improves its service life. Under the conditions of electric field, chemical field, force field, and acid, alkali, and salt media

Non corrosive and non swelling;

6. MGE board does not peel off and has strong shear resistance:

7. MGE board has extremely low water absorption and good dimensional stability.

The main advantages of MGE push skateboard

1. Wear resistance, lower wear rate

2. Good self-lubricating performance and low friction coefficient

3. High impact strength and good toughness.

4. Excellent chemical corrosion resistance, able to withstand almost all acid, alkali, and salt media except for concentrated sulfuric acid, concentrated nitric acid, and a few organic solvents.

5. Non toxic, odorless, and no exudates.

6. It has elasticity, vibration absorption, good self recovery, and extremely low water absorption rate.

7. Excellent low-temperature resistance, not brittle even at -176 degrees Celsius