当前位置：珠海康宝莱仪表有限公司>>阿通特斯 ATOMTEX 核辐射测量和监测产品>>Radiation Monitoring Systems 辐射监测系统>>GAMMA-AT辐射和自动气象监测系统

GAMMA-AT辐射和自动气象监测系统

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号GAMMA-AT

品牌

厂商性质其他

所在地

在线询价收藏产品查看联系电话

更新时间：2024-04-21 18:23:23浏览次数：15次

联系我时，请告知来自塑料机械网

产品分类 品牌分类

暂无信息

珠海康宝莱仪表有限公司

经营模式：其他

商铺产品：3条

所在地区：

询价 给他留言

产品简介

- 伽马辐射智能探头-在每一个独立的测量通道里都有广泛的剂量率测量范围- 正常和紧急操作模式-超过极限值，可进行听觉和视觉报警-通过电话线和无线电频道，进行可靠的数据传输- 长久指示，每10分钟更新-数字数据重传- 外部显示板-UPS（不间断电源）- 诊断全处理设备的可操作性- 在每一个通道，有独立自动测量信息数据库-不拆卸智能探头校准- 带风向和速度，降水和温度传感器

详细介绍

AUTOMATED RADIATION AND WEATHER MONITORING SYSTEM GAMMA-AT

Flexible and reliable multi-channel system for environmental and area radiation monitoring of large radiation-dangerous and radiation-sensitive targets

Features

- Gamma radiation smart probes
- Independent measurement in each channel withtin a wide dose rate measuring range
- Normal and emergency operation modes
- Specifying alarm threhsolds for each smart probe
- Audible and visual alarm at threshold exceeding
- reliable data transfer by telephone lines and radio channels
- Permanent indication updating every 10 min
- Digital data retransmission
- External indication board
- UPS (Uninterruptible Power Supply)
- Full addressing diagnostics of equipment operability
- Independent information databases at each automatic measuring posts
- Calibration without demounting smart probes
- Wind direction and speed, precipitation and temperature sensors

Application

Automatic measuring post (AMP)

Smart probe AT2343 provides absorbed gamma radaition dose rate measuring in the range from 25 nGy/h to 10 Gy/h. Two-chamber Geiger-Muller counters are used as detectors. Data from a smart probe is transmitted to a uniform terminal controller by RS485. Wind speed and direction sensor, precipitation sensor and temperature sensor, external indication board can be connected to the terminal controller. It is possible to provide the terminal controller with a radio unit, a radio station, a radio mast with TL antenna and (or) a telephone unit taking into account communication channels in use. Applied software of automatic measuring post provides digital data forwarding, so it is possible to extend automatic measuring post network to big distances. The system supplies from an uninterruptible power supply. There are two operation modes: an economical mode for operation under normal environment and the mode with frequent data transmission for operation under emergency radiation surrounding. It is possible to create independent databases and maintain data keeping for more that a year due to the nonvolatile memory.

Local response center (LRC)

PC is used as the central control unit, which is delivered together with the terminal controller. Applied software runs under Windows® and provides system configuration, data readout and its processing. There are a map of controlling area and dose rate value in control points on PC display. Dose rate values can be presented as a table or a graph with value averaging for any time period. The processing algorithm detects a sudden dose rate change and switches the emergency operation mode as a result. Alarm threshold exceeding in any smart probe or failure of any system unit are displayed on PC as color zones and accompanied by audible alarm. Acquired from smart probe dose rate results are kept in the datatbase.

Specification

Number of detectors in smart probe	6
Number of smart probes connected to AMP	from 1 to 32
Number of AMPs	from 1 to 128
Absorbed gamma radiation dose rate measuring range	25 nGy/h - 10 Gy/h
Smart probe sensitivity on ¹³⁷Cs	15000 cnt/µGy
Gamma radiation energy range	0.05-1.5 MeV
Intrinsic measurement error	± 15 %
Interface	RS 485
3-level audible and visual alarm
Operating temperature range
smart probes and open-air device	-35 - +50°С
inside units	+5 - +40°С
Maximum distance between a smart probe and terminal controller	1000 m
Radio channel communication range between automatic measuring posts at plain ground	up to 30 km
Protection class
smart probes	IP57
other units	IP54
Radio disturbance
CEI/IEC CISPR 22:1997
Electromagnetic compatibility
CEI/IEC 61000-4-2:1995
IEC 61000-4-3:1995
Power requirements
AC mains, 220 (+22; -33)V, 50±2 Hz
In case of emergency power interruption - accumulator battery 12.6 (+1.3; -1.6) V