WJW-2二氯甲烷浸渍试验机
产品优势
该机适用于将塑料管材、管件、片材等在二氯甲烷恒温水浴中浸渍规定时间，来测试管材、管件、片材等在规定温度下破坏程度的测试仪器。是检测单位、生产单位、科研单位的理想测试仪器。
详细信息
概述
该机适用于将塑料管材、管件、片材等在二氯甲烷恒温水浴中浸渍规定时间，来测试管材、管件、片材等在规定温度下破坏程度的测试仪器。是检测单位、生产单位、科研单位的理想测试仪器。
符合GB/T 13526-2007《硬聚氯乙烯（PVU-U）管材 二氯甲烷浸渍试验方法》。
仪器特点
1、恒温水浴槽内胆采用优质不锈钢材料加工制作，循环系统采用德国WILO磁力循环泵，噪声小，使用寿命长。
2、 制冷机采用空调制冷，方便安装调试及维护。
3、显示控制面板由LED显示区和按键区组成，使整机的温控系统操作简单，清晰易懂，自动记忆前次设置温度值功能。
4、恒温水浴槽配置液位保护报警提示及自动补水的功能。
- 详细介绍 -
规格 国标
用于对塑料管材、管件、片材等进行二氯甲烷的浸渍试验。广泛用于管材管件、片材的生产，检验及研究门部。
一、符合标准：
GB/T13526：硬聚氯乙烯（PVC-U）管材二氯甲烷浸渍试验方法。
二、产品主要组成：
恒温水浴槽、不锈钢容器、试样细孔滤网，控温及计时系统等组成。
三、技术指标：
1、 不锈钢容器规格：850*550*550
2、 二氯甲烷恒温温度：（15-20）±0.5℃
3、 仪表控温范围：10-50℃
4、 仪表控温精度：±0.2℃
5、 仪表显示精度：0.1℃
6、 计时器范围：0---99分钟
7、 计时器精度：1秒
四、试样标准：
试样截取长度至少100mm
五、试样方法：
1、 深度应使试样浸没至少30mm
2、 水封层厚度约为20mm
3、 试样恒温时间20分钟，取出后干燥15分钟
Wjw-2 dichloromethane impregnating tester
Product advantage
This machine is suitable for plastic pipe material, pipe fittings, sheet and in methylene chloride in the constant temperature water bath dipping time, to test such as pipes, pipe fittings, sheet under prescribed temperature damage degree of testing instruments.
Is the test unit, the production unit, the research unit's ideal test instrument.
Detailed information
overview
This machine is suitable for plastic pipe material, pipe fittings, sheet and in methylene chloride in the constant temperature water bath dipping time, to test such as pipes, pipe fittings, sheet under prescribed temperature damage degree of testing instruments.
Is the test unit, the production unit, the research unit's ideal test instrument.
In conformity with GB/T 13526-2007, the test method for dichloromethane impregnated by pvvu -U tubes.
The instrument features
1. Thermostatic water bath tank is made of high quality stainless steel materials. The circulating system adopts German WILO magnetic circulation pump, which has small noise and long service life.
2. Refrigerating machine adopts air conditioning refrigeration to facilitate installation and debugging and maintenance.
3. The display coNol panel consists of LED display area and key area, so that the temperature coNol system of the whole machine is easy to operate, clear and easy to understand, and automatic memory of the previous setting temperature value function.
4. The thermostatic water bath tank has the function of protecting alarm and automatic water filling.
- details -
Specifications gb
Used for dichloromethane impregnating test for plastic pipe, pipe, sheet etc.
Widely used in the production, inspection and research of pipe fittings and sheet material.
I. compliance with standards:
GB/T13526: test method for dichloromethane impregnating for PVC-U tubes.
Ii. Main components of the product:
Constant temperature water bath, stainless steel container, sample thin hole filter, temperature coNol and timing system.
Iii. Technical indicators:
1. Stainless steel container specifications: 850*550*550
2, methylene chloride thermostatic temperature (15-20) plus or minus 0.5 ℃
3, instrument temperature coNol range: 10-50 ℃
4, the instrument temperature coNol precision: plus or minus 0.2 ℃
5, the precision of the instrument shows: 0.1 ℃
6. Scope of timer: 0---99 minutes
7. Timer accuracy: 1 second
Iv. Sample standards:
Sample length at least 100mm
5. Sample method:
1. Depth should make sample immersion at least 30mm
2. The thickness of water seal is about 20mm
3. The sample temperature is 20 minutes, and then dry for 15 minutes
