高周波双头皮带无缝焊接机业务尧生
此机为双头跑步带熔接机，两个工作头交替工作，提高生产效率，高周输出稳定，成品率高。压出的跑步皮带熔接牢固，美观。保持接合平整原皮樣, 特点：1.使用*自动同调系统。只要预先设定好胶合电流值和时间，本系统会根据电流的反馈信号自动调节，胶合电流不会受到厚薄的变化和模具温度上升的影响。因此产品质量稳定，一般操作人员即可轻松担任，不像普通射击频胶合机，材料厚薄，模温变化均需依靠熟练的操作人员不断调节匹配，因此胶合质量不稳定，产品不合格率偏高，变成废料造成损失。 2.本机使用超高灵敏火花防止器，机器能在火花产生的瞬间切断高周输出，减少模具烧损的现象发生（在正当操作情况下，基本不损伤模具）。 3.本机采用双压床设计，即在A床胶合完成进入冷却阶段，B床便可以进行胶合作业。如此AB床不断交互使用用一振荡器，大大提高振荡器的使用效率，以节省机器的设置空间。 4.本机采用世界上*的方型高Q值发振器，具有发振频率稳定，输出功率高，谐波量少的优点。 *生产速度：如皮料的熔接宽度在310MM-640MM之间的，速度在20秒/模。用途：適用于貼合厚膠布接駁。适用于各种含PVC成份的皮料、厚度的皮革，皮带，输送带，跑步带的贴合和接驳和熔接。 Double belt seamless high-frequency welding machine; this machine is double-headed running with a special welding machines, two working heads turn, improve production efficiency, high-frequency output stability, and finished product rate. Pressure welding belt running out of a solid and beautiful. Maintain the bonding formation of the original skin sample, Features: 1. The use of advanced automated systems the same tune. As long as the pre-set current value and a good bonding time, the system based on current feedback signal auto - Regulation, will not be glued current thickness change and mold temperature rise. Therefore, product quality is stable, can easily serve as a general operator, unlike the ordinary firing frequency gluing machine, material thickness, mold temperature changes are required to rely on skilled operators constantly adjust match, so gluing inconsistent quality, the product failure rate high become waste losses. 2. This machine to prevent the use of ultra-high sensitivity spark device, the machine can produce sparks which could cut off the high-cycle output of the moment to reduce the mold burnout phenomenon （in the proper operating conditions, basically does not damage mold）. 3. This machine adopts double-press-bed design, that is, the completion of A-Bed glued into the Cooling Stage, B-bed operation can be glued. AB-bed continuous interactive use of such an oscillator with greatly enhanced efficiency of the oscillator in order to save settings for the machine room. 4. This machine adopts the world's advanced high-Q square vibration hair with hair vibration frequency stability, output power of high harmonic less advantages. * Production speed: leather materials, such as welding 310MM-640MM width between the speed at 20 sec / mold. Uses: Suitable for fit-thick tape feeder. Applicable to all kinds of ingredients containing PVC leather material, the thickness of leather, belts, conveyor belt, treadmill belt fitting and the connection and weld
